Forget the US Government and Obama’s rhetoric. Remember, every presidential candidate has campaigned on Energy Independence for the last thirty years. Forget your local utility. They’ve been doing business the same way for over 60 years.
Several Blogs ago I predicted the demise of the electric distribution industry as we know it. In Death of the Electric Industry I predicted the end of distribution utilities. In Death of the Electric Industry Part II, I explained how I think this is going to happen.
As little bits and pieces come to me that support my prediction, I tend to get a smug little grin on my face. My predictions had to do with residential customers jumping the grid tied ship like rats on a sinking vessel. But, Solar buzz recently announced a small commercial project that leads the way in proving that even industry can make use of solar energy in a mediocre solar climate like Connecticut. Tri-Town Precision Plastics plans to go solar and expects their investment to pay for itself in six years and deliver all of their electric energy needs all year long.
To plan your escape from the grid you only need two things, know-how and cash. Check out these websites to get the know-how. By acting on this information you can trim your energy appetite and get your house ready for energy independence without the expense of a solar system. Then after you’ve saved a bundle off your utility bill (said bundle being prudently stashed in a secure savings account) you are ready to use available incentives in your area to match your cash and build the system. Find my energy saving tips here.
Useful information is all about “Trust”. If you don’t trust the source of the information you are not going to follow their recommendations. Find sources of Know-How that you trust. Here are some that look pretty good to me.
The Edison Electric Institute (EEI) sponsors efficiency tips at getenergyactive.org. Organized in 1933, EEI is the association of U.S. shareholder or investor-owned electric companies. Their members serve 95 percent of the end use customers in the investor-owned part of the industry, and represent approximately 70 percent of the U.S. electric power industry. So you might be justified in being suspicious of their motives. However, all utilities, especially investor-owned utilities are falling all over themselves these days to prove to regulators that their rate increase requests are justified. One way that they do this is to show State Regulatory Commissions that they take energy conservation seriously.
The US Environmental Protection Agency (EPA) has locked horns with utilities across the nation over air quality issues. These guys are not friends of the electric utility industry. They are supposed to be friends of the environment. ENERGY AND YOU is their site for all kinds of good information on energy conservation.
The benefits of visiting the above two sites are that they aren’t trying to sell any specific products.
Commercial sites might make you leery, but I think Real Goods has a good reputation for getting systems on the ground that work. Be sure to visit their Get Started and Economics & Financing links.
The American Solar Energy Society (ASES) is a nonprofit organization dedicated to increasing the use of solar energy, energy efficiency, and other sustainable technologies in the U.S. Sure they are selling solar equipment and trying to employ solar installation contractors, but these guys can’t last if they lie. Their Solar calculator will take your Monthly kWh and calculate the size of the system you need based on your climate.
Now you are ready to match your utility savings with incentives that can help reduce your out of pocket expenses. This data base at the Database of State Incentives for Renewables and Efficiency can help you stretch your funds to meet your energy independence goals.
Maybe I’ll be reading about your off grid solar system and smiling one of these days. Don’t get mad at your utility, leave them
© 2008 Mark R. Daily
Tuesday, December 23, 2008
Wednesday, December 17, 2008
Steps to Cut Your Utility Bill
Why spend any more money than necessary on your utility bills? Most people continue doing it because they just can’t get motivated to do anything about energy efficiency or energy conservation. They don’t know where to start or which steps to take to save the most off their utility bills. Many people want to “go solar” or be “off the grid” without really knowing what those terms mean.
We all like the idea of energy independence. The recent election reminds me that there has not been a presidential candidate since before Jim Carter that hasn’t promised “energy independence”. Yet, our dependence on energy grows everyday and only a handful of homes provide “off-grid” energy and 21st century western world comforts at the same time.
Where do you start? Whether you plan to “go solar” or just cut your utility bill, the steps are the same.
Step one; find out what energy you use and why you use it. This is harder than it sounds but not as hard as you might think. By using a combination of your own utility bill’s energy use history, a $40.00 appliance meter and the gas or electric meter on your property, you will be able to figure it out.
The EPA’s Power Profiler can get you started with some basic information. They claim “Power Profiler will:
- Determine your power grid region based on your ZIP code and electric utility
- Compare the fuel mix and air emissions rates of the electricity in your region to the national average
- Determine the air emissions impacts of electricity use in your home or business
“Power Profiler is very easy to use and takes about 5 minutes. To start, all you need is your ZIP code.”
Its true and it seems fairly accurate, although you may not be able to pick the exact power company supplying your home. Still it’s a fun exercise and it’s educational. By clicking on the My Emmisions you will see how your house contributes to the issue of global climate change. You‘ll get the most detailed answer if you can fill in your monthly kWh use from your monthly electric bill. That’s another good reason to keep track of your personal energy impact by reading your bill and writing down the monthly kWh. You can get this data from your local utility too. If you do this, ask for the monthly data for the last three years so you can average out weird weather or unusually visitor impacts – like your brother-in-law leaving the refrigerator door open the whole week he was house sitting.
While you are at this site you should click the other two options as well, “Be More Energy Efficient” and “ Buy Green Power”. These links get you to information that can save you money and help you learn how and why you use energy.
The main step in the “How and Why I use Energy” investigation is to do an “Energy Audit”. Some people don’t get this, but you have to do this. I once worked on a video production that filmed one of my energy audits for a consenting customer and the videographer wrote “Energy Odd It” on the cover. I wish a different term had been coined for this, like “List of Energy Using Crap in your House”, because “Energy Audit” sounds so….. mathematical. Sixth grade math is all you need for this.
If you can’t do sixth grade math try the U.S. Department of Energy, Energy Efficiency and Renewable Energy Consumers Guide to Home Energy Audits. For some reason they do not include appliance energy use as part of their “Home Energy Audit” so you will have to go to their separate Appliance and Home Electronics section. Do your Audit on a room by room search. This will point to rooms that you will want to focus on to get the most energy savings.
Once you have your List of Energy Using Crap in Your House (LOEUCIYH), assign an energy use unit to it like kWh or CCF for the month. This is the only way to motivate a reduction in your energy use which is the only way you are going to actually save money off your utility bill.
By adding up all of the monthly Energy Use numbers in each room from your LOEUCIYH , you will see patterns of use that you might be able to change. No you are ready to compare your Energy Audit, I mean LOEUCIYH results with your unit price per kWh or CCF to get actual dollars spend on your energy. You really should come within about 5% of your actual bill- don’t forget to subtract tax and minimum monthly charges.
Saving money off your utility and saving the planet are important actions we should all take. Hey, if it was easy, we would have already done it, right? Now you know where to start, so what are you waiting for? You could be saving money.
"Never doubt that a small group of thoughtful, committed citizens can change the world; indeed, it's the only thing that ever has". - Margaret Mead
© 2008 Mark R. Daily
We all like the idea of energy independence. The recent election reminds me that there has not been a presidential candidate since before Jim Carter that hasn’t promised “energy independence”. Yet, our dependence on energy grows everyday and only a handful of homes provide “off-grid” energy and 21st century western world comforts at the same time.
Where do you start? Whether you plan to “go solar” or just cut your utility bill, the steps are the same.
Step one; find out what energy you use and why you use it. This is harder than it sounds but not as hard as you might think. By using a combination of your own utility bill’s energy use history, a $40.00 appliance meter and the gas or electric meter on your property, you will be able to figure it out.
The EPA’s Power Profiler can get you started with some basic information. They claim “Power Profiler will:
- Determine your power grid region based on your ZIP code and electric utility
- Compare the fuel mix and air emissions rates of the electricity in your region to the national average
- Determine the air emissions impacts of electricity use in your home or business
“Power Profiler is very easy to use and takes about 5 minutes. To start, all you need is your ZIP code.”
Its true and it seems fairly accurate, although you may not be able to pick the exact power company supplying your home. Still it’s a fun exercise and it’s educational. By clicking on the My Emmisions you will see how your house contributes to the issue of global climate change. You‘ll get the most detailed answer if you can fill in your monthly kWh use from your monthly electric bill. That’s another good reason to keep track of your personal energy impact by reading your bill and writing down the monthly kWh. You can get this data from your local utility too. If you do this, ask for the monthly data for the last three years so you can average out weird weather or unusually visitor impacts – like your brother-in-law leaving the refrigerator door open the whole week he was house sitting.
While you are at this site you should click the other two options as well, “Be More Energy Efficient” and “ Buy Green Power”. These links get you to information that can save you money and help you learn how and why you use energy.
The main step in the “How and Why I use Energy” investigation is to do an “Energy Audit”. Some people don’t get this, but you have to do this. I once worked on a video production that filmed one of my energy audits for a consenting customer and the videographer wrote “Energy Odd It” on the cover. I wish a different term had been coined for this, like “List of Energy Using Crap in your House”, because “Energy Audit” sounds so….. mathematical. Sixth grade math is all you need for this.
If you can’t do sixth grade math try the U.S. Department of Energy, Energy Efficiency and Renewable Energy Consumers Guide to Home Energy Audits. For some reason they do not include appliance energy use as part of their “Home Energy Audit” so you will have to go to their separate Appliance and Home Electronics section. Do your Audit on a room by room search. This will point to rooms that you will want to focus on to get the most energy savings.
Once you have your List of Energy Using Crap in Your House (LOEUCIYH), assign an energy use unit to it like kWh or CCF for the month. This is the only way to motivate a reduction in your energy use which is the only way you are going to actually save money off your utility bill.
By adding up all of the monthly Energy Use numbers in each room from your LOEUCIYH , you will see patterns of use that you might be able to change. No you are ready to compare your Energy Audit, I mean LOEUCIYH results with your unit price per kWh or CCF to get actual dollars spend on your energy. You really should come within about 5% of your actual bill- don’t forget to subtract tax and minimum monthly charges.
Saving money off your utility and saving the planet are important actions we should all take. Hey, if it was easy, we would have already done it, right? Now you know where to start, so what are you waiting for? You could be saving money.
"Never doubt that a small group of thoughtful, committed citizens can change the world; indeed, it's the only thing that ever has". - Margaret Mead
© 2008 Mark R. Daily
Tuesday, December 9, 2008
Utility Bill Paying 101
Nationwide there is a certain frustration about paying utility bills. So much so that people jokingly refer to the experience as paying “futility bills”. These jokers probably view their electric and gas bill as something someone does to them rather than something that they do to themselves, but in all cases it is true that if you do not have a meter you will not have a bill. It’s easy right? Just call those bastards up today and say, come and get this thing out of my yard- or off my house or whatever; then, no bill. Some frustrated bill payers have actually done this and gone “off the grid” with generators or alternate energy systems that include wind and solar. Being your own power company sounds cool, but if it was that easy, more people would do it.
The first thing that you need to know about utility bill paying, is that you are going to be paying one for the rest of your life – one way or another. You may be off the grid and get all your energy from wind and photovoltaic power, but unless you paid cash for that system, you are making loan payments that amount to a “utility bill”. Once you pay off the loan there may be minimal maintenance expenses, but it won’t be zero. And, if you have batteries, in seven to ten years they’ll need to be replaced – so there will always be some type of “utility bill” in time, effort or cash to keep your lights on and beer cold. Even if you get a rental deal where the landlord pays the utilities, a portion of your rent payment covers the utilities. The only way out of paying for utilities is to not have a meter and to not use any electricity or gas of any kind, period.
Why do I make a point of saying “not have a meter and not use any electricity or gas”? Aren’t they the same thing? No. Electric and gas meter costs are coming down, but they are not free. No utility is going to give you a free meter. You will be paying for your meter through a minimum monthly fee on your bill or the meter expense will be built into your energy use fee.
Your Load - In utility language, your house or business is a “load”. This means that your building needs electricity or gas and depending on a long list of variables you either need a little electricity or gas or a lot of electricity or gas. So you are either a little load or a big load or something in between – but in all cases, if you need electricity or gas, you are a load. You will sometimes hear the term “demand”. This is a synonym for “load” because you – or at least your building is “demanding” electricity or gas. This is the source of the term “demand side management” or DSM. If your utility has DSM programs, they are trying to manage the demand, usually downward, to reduce the supply that they have to come up with.
Residential electricity is billed by the kilowatt hour (kWh). The “W” in the abbreviation is capitalized in reference to James Watt. One kilowatt hour is the energy used by a 1,000 watt load in one hour. For example, if you turn on ten 100 watt bulbs for an hour, you use 1 kWh of electricity.
Propane gas is generally billed by the gallon. Natural gas is generally billed by the Therm, or 100 cubic feet (CCF).
It seems elementary, but utilities are businesses. They have to make money to cover their expenses just like any other business. If they are an investor owned utility, they must be concerned about share holder profits. If they are a municipal utility they must be concerned about the needs of the citizens in their city and if they are cooperative utilities, they must meet the expectations of their members. All utilities cover most of the expense of getting the power to you by charging a rate per unit (kWh or CCF). The more you use the more you pay.
All utilities buy wholesale energy, electricity or gas and “distribute” it to customers like you; hence the term “distribution utility”. All utilities have wholesale power expenses and distribution expenses. In most cases the wholesale expense is fifty to eighty percent of the retail rate. All utilities have fixed expenses and variable expenses. Fixed expenses are those expenses that occur whether or not there is a load or demand; like the cost of insurance, depreciation, equipment, billing and administration. There are literally billions of dollars of power poles, wires, pipelines, transformers and meters sitting there across the nation ready to spring into action when you flip the switch or turn the knob. Those expenses don’t go way just because you don’t need electricity or gas this month. Variable expenses are those expenses that change with the load or demand placed on the utility’s supply. The more you use the more your utility has to buy.
Your Bill - In addition to the unit of energy billed, there is usually a minimum monthly charge. Some utilities call this charge an availability of service fee. This fee generally tries to recover the fixed operating expenses mentioned above. If you don’t have a minimum monthly charge on your bill, those fixed charges are rolled into your unit rate. There are pros and cons beyond the scope of this week’s blog for both ways of billing. The more your bill is based on a per unit rate the more control you have over the size of your bill.
Every utility bill payer should know the price per unit (kWh or CCF) and the minimum monthly charge that they are paying. You don’t buy gas for your car without looking at the price per gallon so don’t buy electricity or heating fuel without knowing the price. The number of kWh or CCF used during your billing period will be on your bill. Really, it is there so keep looking. The price per unit is not always on your bill. We are back to that pesky sixth grade math.
You can calculate your rates by simply dividing your total bill by the total units that you used during that billing period. See Table 5.6.A. Average Retail Price of Electricity to Ultimate Customers by End-Use Sector, by State, August 2008 and 2007(Cents per kilowatthour) on the Energy Information Administration website to find local average kWh rates.
Natural gas bills may have a confusing list of other charges that make it hard to find a per unit cost. And, while most residential bills come in units of hundred cubic feet increments (CCF or Therms), statistics a generally listed in thousand cubic feet (MCF). The Energy Information Administration statistics on the average price for natural gas make it harder to compare with your bill.
Every utility payer should also know the billing period for your bill. If you are billed one month for thirty days of use and the next month for 20 days of use, the size of your bill will be different even if you use the same kWh of electricity or the same CCF of gas every day.
The main thing to realize about your utility bill is that it is all under your control. You can elect to never use any electricity or gas or you can pick and choose the appliances and equipment that you buy which directly affects the size of your utility bill.
Deposits – Unlike the gas station, when you buy natural gas or electricity, you don’t pay until after you use it. This means that by the time you pay your first utility bill after moving, the utility has given you at least a month and a half worth of their expensive product without getting paid. And, if you drop dead after seeing your first bill they are out a lot of money. So, most utilities will either check your credit history or require a deposit.
How to complain about your bill - Before you call, look at the meter reading dates. Maybe your son or daughter invited the whole high school football or volley team to spend the weekend during this time and you just forgot about it. Maybe you had the flu and cranked the thermostat to fight the chills.
Stay calm; screaming, or profanity will not serve you well when dealing with utility employees. They have heard it all. They have already heard whatever question, complaint, excuse or threat you are about to tell them, so just chill. Make sure you have your bill in front of you so you can give them your account number. This also helps you stay focused on your complaint and way from inappropriate comments about their relatives or anatomy.
If you think your bill is too high, ask them to help you determine if this is an actual or estimated bill. There should be a code on your bill that will tell you this, but sometimes it’s hard to find.
Next, ask for help verifying the number of billing days. I once thought I had a big bill only to find that last month’s bill was for 22 days and this month’s bill was for 33 days. Sometimes holidays or personnel scheduling screws up the meter reading schedule.
Other things you can ask about include the weather. Some utilities keep track of the weather during billing periods as a service to their customers. Colder or hotter weather usually mean higher utility bills.
If you still can’t come up with a reason that your bill is higher than expected you can ask to have your meter tested, but be careful what you ask for. Meter testing is performed on a meter test board in the meter shop. This means that you are getting a new or refurbished meter if you ask for a test. Most meters are simple mechanical devices. And, like your car, they don’t speed up when they are having trouble. Most utilities have a testing and replacement schedule set by state law. Once in a while you can catch them with a meter that has been in the field too long, but if you do, chances are your bill is going to be higher, not lower after the change. All meter exchanges have to be carefully documented so don’t assume that there is any monkey business going on. Deliberate discrepancies are easy to catch and most utility employees like their jobs.
If none of your questions or requests result in a lower bill, it’s time to tour your house. Obvious problems like leaky hot water faucets, well pumps that never turn off due to line leaks, broken thermostats, stuck valves and things that were left “on” when you thought they were “off”, often trigger more energy use. My favorite discovery during an energy audit for an angry customer was the space heater, plugged into a tool shed with the door left open in January. It’s less embarrassing to take that tour by yourself.
Phantom loads have gotten a lot of press lately and can increase your electric bill by several dollars a month. Phantom loads get their name from the fact that the energy used doesn’t give you anything immediately tangible, like light or toast. These loads result from those remote control devices that are always on. You should have a handle on this problem after you get that appliance meter mentioned in last week’s blog.
Thank you for completing Utility Bill Paying 101. If there is ever anything about your utility bill that you don’t understand, let me know. I’d be glad to help, for free. No I won’t pay your bill for you. Nice try. I will do my best to take the confusion out of what it is you are paying as well as help you wade through a bill interpretation. Just email me. ( mrdaily@markricharddaily.com)
If it’s something you have to do every month for the rest of your life, you might as well get good at it. Understanding what you get from your gas and electric utility gives you one less thing to worry about and makes it less like paying for gas and electric futilities.
© Mark Daily, 2008
The first thing that you need to know about utility bill paying, is that you are going to be paying one for the rest of your life – one way or another. You may be off the grid and get all your energy from wind and photovoltaic power, but unless you paid cash for that system, you are making loan payments that amount to a “utility bill”. Once you pay off the loan there may be minimal maintenance expenses, but it won’t be zero. And, if you have batteries, in seven to ten years they’ll need to be replaced – so there will always be some type of “utility bill” in time, effort or cash to keep your lights on and beer cold. Even if you get a rental deal where the landlord pays the utilities, a portion of your rent payment covers the utilities. The only way out of paying for utilities is to not have a meter and to not use any electricity or gas of any kind, period.
Why do I make a point of saying “not have a meter and not use any electricity or gas”? Aren’t they the same thing? No. Electric and gas meter costs are coming down, but they are not free. No utility is going to give you a free meter. You will be paying for your meter through a minimum monthly fee on your bill or the meter expense will be built into your energy use fee.
Your Load - In utility language, your house or business is a “load”. This means that your building needs electricity or gas and depending on a long list of variables you either need a little electricity or gas or a lot of electricity or gas. So you are either a little load or a big load or something in between – but in all cases, if you need electricity or gas, you are a load. You will sometimes hear the term “demand”. This is a synonym for “load” because you – or at least your building is “demanding” electricity or gas. This is the source of the term “demand side management” or DSM. If your utility has DSM programs, they are trying to manage the demand, usually downward, to reduce the supply that they have to come up with.
Residential electricity is billed by the kilowatt hour (kWh). The “W” in the abbreviation is capitalized in reference to James Watt. One kilowatt hour is the energy used by a 1,000 watt load in one hour. For example, if you turn on ten 100 watt bulbs for an hour, you use 1 kWh of electricity.
Propane gas is generally billed by the gallon. Natural gas is generally billed by the Therm, or 100 cubic feet (CCF).
It seems elementary, but utilities are businesses. They have to make money to cover their expenses just like any other business. If they are an investor owned utility, they must be concerned about share holder profits. If they are a municipal utility they must be concerned about the needs of the citizens in their city and if they are cooperative utilities, they must meet the expectations of their members. All utilities cover most of the expense of getting the power to you by charging a rate per unit (kWh or CCF). The more you use the more you pay.
All utilities buy wholesale energy, electricity or gas and “distribute” it to customers like you; hence the term “distribution utility”. All utilities have wholesale power expenses and distribution expenses. In most cases the wholesale expense is fifty to eighty percent of the retail rate. All utilities have fixed expenses and variable expenses. Fixed expenses are those expenses that occur whether or not there is a load or demand; like the cost of insurance, depreciation, equipment, billing and administration. There are literally billions of dollars of power poles, wires, pipelines, transformers and meters sitting there across the nation ready to spring into action when you flip the switch or turn the knob. Those expenses don’t go way just because you don’t need electricity or gas this month. Variable expenses are those expenses that change with the load or demand placed on the utility’s supply. The more you use the more your utility has to buy.
Your Bill - In addition to the unit of energy billed, there is usually a minimum monthly charge. Some utilities call this charge an availability of service fee. This fee generally tries to recover the fixed operating expenses mentioned above. If you don’t have a minimum monthly charge on your bill, those fixed charges are rolled into your unit rate. There are pros and cons beyond the scope of this week’s blog for both ways of billing. The more your bill is based on a per unit rate the more control you have over the size of your bill.
Every utility bill payer should know the price per unit (kWh or CCF) and the minimum monthly charge that they are paying. You don’t buy gas for your car without looking at the price per gallon so don’t buy electricity or heating fuel without knowing the price. The number of kWh or CCF used during your billing period will be on your bill. Really, it is there so keep looking. The price per unit is not always on your bill. We are back to that pesky sixth grade math.
You can calculate your rates by simply dividing your total bill by the total units that you used during that billing period. See Table 5.6.A. Average Retail Price of Electricity to Ultimate Customers by End-Use Sector, by State, August 2008 and 2007(Cents per kilowatthour) on the Energy Information Administration website to find local average kWh rates.
Natural gas bills may have a confusing list of other charges that make it hard to find a per unit cost. And, while most residential bills come in units of hundred cubic feet increments (CCF or Therms), statistics a generally listed in thousand cubic feet (MCF). The Energy Information Administration statistics on the average price for natural gas make it harder to compare with your bill.
Every utility payer should also know the billing period for your bill. If you are billed one month for thirty days of use and the next month for 20 days of use, the size of your bill will be different even if you use the same kWh of electricity or the same CCF of gas every day.
The main thing to realize about your utility bill is that it is all under your control. You can elect to never use any electricity or gas or you can pick and choose the appliances and equipment that you buy which directly affects the size of your utility bill.
Deposits – Unlike the gas station, when you buy natural gas or electricity, you don’t pay until after you use it. This means that by the time you pay your first utility bill after moving, the utility has given you at least a month and a half worth of their expensive product without getting paid. And, if you drop dead after seeing your first bill they are out a lot of money. So, most utilities will either check your credit history or require a deposit.
How to complain about your bill - Before you call, look at the meter reading dates. Maybe your son or daughter invited the whole high school football or volley team to spend the weekend during this time and you just forgot about it. Maybe you had the flu and cranked the thermostat to fight the chills.
Stay calm; screaming, or profanity will not serve you well when dealing with utility employees. They have heard it all. They have already heard whatever question, complaint, excuse or threat you are about to tell them, so just chill. Make sure you have your bill in front of you so you can give them your account number. This also helps you stay focused on your complaint and way from inappropriate comments about their relatives or anatomy.
If you think your bill is too high, ask them to help you determine if this is an actual or estimated bill. There should be a code on your bill that will tell you this, but sometimes it’s hard to find.
Next, ask for help verifying the number of billing days. I once thought I had a big bill only to find that last month’s bill was for 22 days and this month’s bill was for 33 days. Sometimes holidays or personnel scheduling screws up the meter reading schedule.
Other things you can ask about include the weather. Some utilities keep track of the weather during billing periods as a service to their customers. Colder or hotter weather usually mean higher utility bills.
If you still can’t come up with a reason that your bill is higher than expected you can ask to have your meter tested, but be careful what you ask for. Meter testing is performed on a meter test board in the meter shop. This means that you are getting a new or refurbished meter if you ask for a test. Most meters are simple mechanical devices. And, like your car, they don’t speed up when they are having trouble. Most utilities have a testing and replacement schedule set by state law. Once in a while you can catch them with a meter that has been in the field too long, but if you do, chances are your bill is going to be higher, not lower after the change. All meter exchanges have to be carefully documented so don’t assume that there is any monkey business going on. Deliberate discrepancies are easy to catch and most utility employees like their jobs.
If none of your questions or requests result in a lower bill, it’s time to tour your house. Obvious problems like leaky hot water faucets, well pumps that never turn off due to line leaks, broken thermostats, stuck valves and things that were left “on” when you thought they were “off”, often trigger more energy use. My favorite discovery during an energy audit for an angry customer was the space heater, plugged into a tool shed with the door left open in January. It’s less embarrassing to take that tour by yourself.
Phantom loads have gotten a lot of press lately and can increase your electric bill by several dollars a month. Phantom loads get their name from the fact that the energy used doesn’t give you anything immediately tangible, like light or toast. These loads result from those remote control devices that are always on. You should have a handle on this problem after you get that appliance meter mentioned in last week’s blog.
Thank you for completing Utility Bill Paying 101. If there is ever anything about your utility bill that you don’t understand, let me know. I’d be glad to help, for free. No I won’t pay your bill for you. Nice try. I will do my best to take the confusion out of what it is you are paying as well as help you wade through a bill interpretation. Just email me. ( mrdaily@markricharddaily.com)
If it’s something you have to do every month for the rest of your life, you might as well get good at it. Understanding what you get from your gas and electric utility gives you one less thing to worry about and makes it less like paying for gas and electric futilities.
© Mark Daily, 2008
Wednesday, December 3, 2008
Energy Conservation- A Life Style You Can’t Afford To Ignore
You may not be a gourmet chef but, I’ll bet you have equipment for cooking and eating – you know- plates and pots and skillets and knives. You may not be a professional painter, but even if you are a renter, I imagine you have a paintbrush and some old paint.. You may not be a professional writer or author, but somewhere in your house I could probably find paper and pen or computer and printer. You may not be a specialist in sewage treatment but I’m guessing you have some toilet paper and a bathroom in your place.
So if you believe in saving energy and reducing utility bills, what kind of equipment do you have to help you create energy savings without just freezing in the dark?
You didn’t give up eating, just because you don’t care to cook. You probably paint something once in a while, even if your brush is in bad shape. And, you probably won’t give up going to the bathroom, just because of the…. well you know. So, why haven’t you done anything lately about energy conservation? If the experts are right, money spent cutting utility bills was a better investment than the stock market even before the credit crunch and stock market tumble.
Here is a thought. You don’t work on energy conservation with the same regularity as preparing meals or going to the bathroom because you don’t have the right equipment.
In fact, energy conservation takes equipment that most people don’t know about and that may not be staring you in the face every time you go to the grocery store. It might not even be sold at Wal-Mart (gasp).
The best tool to use for energy conservation is your electric or gas meter. That’s right. You don’t have to go to the store at all. You just have to find it in your yard or attached to the side of your house. You are already paying for it every month on your gas or electric bill, so use it. Go out with a note pad and jot down the reading – gas and electric. Write down the date and time you took the reading and stick that note right by the spot where you usually sit down to pay your utility bills.
When the next bill comes, look for the meter reading number on the bill. If you can’t find that number, call the toll free number on your bill and ask them where it is. The number on your bill should be larger than the number on your note unless you are into net-metering (see previous blogs if you’re not sure what net-metering is). By counting the total number of billing days shown on your bill and comparing it with the date on your note, you know the number of days between your reading and the end of the month reading from your utility. Gas utilities typically sell their product in units of one hundred Cubic Feet (CCF) or in therms. One therm=100,000 Btu, which is the heat content of about 100 cubic feet of gas. Electric Utilities sell their product in kilo-watt hours (kWh). By comparing the days to the CCF or kWh reading and a little sixth grade math, you can figure the number of CCF of gas or the number of kWh of electricity that you used per day.
You can do that every month if you want to, but try to at least do it in the middle of every season. Make it an appointment, in whatever it is that you make appointments in, so you don’t forget. Just repeat after me, “what gets measured gets managed”.
If any of this is “Greek” to you, visit next week’s Blog for Utility Billing 101. I’ll help you dissect your bill and touch on phantom loads.
Now that you know the big picture, how do you find out what’s making that meter spin? You need a fork. No silly, not like a real fork, a figurative fork. You have a fork to eat with right? Well, you can’t dine on energy savings without the right utensil. You need a meter. I’m not aware of any gas meters for individual appliances that are reasonable to buy, but there are starting to be a host of affordable appliance meters for electric appliances.
With an appliance meter, you can find out how your equipment really performs, sniff out phantom loads, and find small energy hogs that you might be able to butcher (unplug) so you can stop paying for piggies or kilowatt hours you don’t really need.
The holidays are a perfect time to spring for an appliance meter. Get one for yourself with grandma’s thoughtful check, or buy one for the greenie in your house.
If you search for “Power Monitors” or meters on-line, you will find a confusing list of products that are mostly designed for professional utility use. Unless you have specific training and state of the industry protective equipment, these monitors are not for you. There are, however, a couple of safe alternatives for home owners.
I still use my tried and true, P3Kill A Watt model P4400 . The easier to use but slightly more expensive model P4460 also looks useful. At around $30 to $50 dollars, you can almost imagine these as stocking stuffers. With these monitors, you will only be able to check appliances that plug into the wall. I used my P4400 and by standing on my head, (read Paul’s P4400 review) I discovered that buying a new dehumidifier would pay for itself in a couple of years; learned that my old television was a huge phantom load, and; found out that my computer equipment was costing pennies a month.
One of the newer monitors looks promising and lets you check appliances that might be hard to monitor individually, like your dishwasher or air conditioning equipment. The Black and Decker EM 100B Power Monitor straps to your electric meter and with a little data entry based on your own electric bill, you can see what happens when you turn on different pieces of equipment in your house. It works with a wireless transmitter that communicates between the device clamped to your meter and the hand held display that you can carry around to different rooms. When you flip the switch on your equipment and start using electricity, the monitor interprets the change in your meter to give you information that shows what that equipments’ energy use will be. At around $100 you need a serious “greenie” in the house to make this gift appropriate.
Hey, no one said it would be easy. Success as a cook isn’t easy either, but there is nothing like the satisfied feeling you get when you see your utility bill drop. By monitoring your equipment you can choose better management strategies, like turning it down or off, or getting an appliance timer to limit the on time. Good luck saving energy and cutting your utility bills. I hope you will get the right tools to enjoy it. Remember that energy conservation is a life style and like just like the process of going to the bathroom, you really can’t afford to skip it. Who would want to?
© Mark Daily, 2008
So if you believe in saving energy and reducing utility bills, what kind of equipment do you have to help you create energy savings without just freezing in the dark?
You didn’t give up eating, just because you don’t care to cook. You probably paint something once in a while, even if your brush is in bad shape. And, you probably won’t give up going to the bathroom, just because of the…. well you know. So, why haven’t you done anything lately about energy conservation? If the experts are right, money spent cutting utility bills was a better investment than the stock market even before the credit crunch and stock market tumble.
Here is a thought. You don’t work on energy conservation with the same regularity as preparing meals or going to the bathroom because you don’t have the right equipment.
In fact, energy conservation takes equipment that most people don’t know about and that may not be staring you in the face every time you go to the grocery store. It might not even be sold at Wal-Mart (gasp).
The best tool to use for energy conservation is your electric or gas meter. That’s right. You don’t have to go to the store at all. You just have to find it in your yard or attached to the side of your house. You are already paying for it every month on your gas or electric bill, so use it. Go out with a note pad and jot down the reading – gas and electric. Write down the date and time you took the reading and stick that note right by the spot where you usually sit down to pay your utility bills.
When the next bill comes, look for the meter reading number on the bill. If you can’t find that number, call the toll free number on your bill and ask them where it is. The number on your bill should be larger than the number on your note unless you are into net-metering (see previous blogs if you’re not sure what net-metering is). By counting the total number of billing days shown on your bill and comparing it with the date on your note, you know the number of days between your reading and the end of the month reading from your utility. Gas utilities typically sell their product in units of one hundred Cubic Feet (CCF) or in therms. One therm=100,000 Btu, which is the heat content of about 100 cubic feet of gas. Electric Utilities sell their product in kilo-watt hours (kWh). By comparing the days to the CCF or kWh reading and a little sixth grade math, you can figure the number of CCF of gas or the number of kWh of electricity that you used per day.
You can do that every month if you want to, but try to at least do it in the middle of every season. Make it an appointment, in whatever it is that you make appointments in, so you don’t forget. Just repeat after me, “what gets measured gets managed”.
If any of this is “Greek” to you, visit next week’s Blog for Utility Billing 101. I’ll help you dissect your bill and touch on phantom loads.
Now that you know the big picture, how do you find out what’s making that meter spin? You need a fork. No silly, not like a real fork, a figurative fork. You have a fork to eat with right? Well, you can’t dine on energy savings without the right utensil. You need a meter. I’m not aware of any gas meters for individual appliances that are reasonable to buy, but there are starting to be a host of affordable appliance meters for electric appliances.
With an appliance meter, you can find out how your equipment really performs, sniff out phantom loads, and find small energy hogs that you might be able to butcher (unplug) so you can stop paying for piggies or kilowatt hours you don’t really need.
The holidays are a perfect time to spring for an appliance meter. Get one for yourself with grandma’s thoughtful check, or buy one for the greenie in your house.
If you search for “Power Monitors” or meters on-line, you will find a confusing list of products that are mostly designed for professional utility use. Unless you have specific training and state of the industry protective equipment, these monitors are not for you. There are, however, a couple of safe alternatives for home owners.
I still use my tried and true, P3Kill A Watt model P4400 . The easier to use but slightly more expensive model P4460 also looks useful. At around $30 to $50 dollars, you can almost imagine these as stocking stuffers. With these monitors, you will only be able to check appliances that plug into the wall. I used my P4400 and by standing on my head, (read Paul’s P4400 review) I discovered that buying a new dehumidifier would pay for itself in a couple of years; learned that my old television was a huge phantom load, and; found out that my computer equipment was costing pennies a month.
One of the newer monitors looks promising and lets you check appliances that might be hard to monitor individually, like your dishwasher or air conditioning equipment. The Black and Decker EM 100B Power Monitor straps to your electric meter and with a little data entry based on your own electric bill, you can see what happens when you turn on different pieces of equipment in your house. It works with a wireless transmitter that communicates between the device clamped to your meter and the hand held display that you can carry around to different rooms. When you flip the switch on your equipment and start using electricity, the monitor interprets the change in your meter to give you information that shows what that equipments’ energy use will be. At around $100 you need a serious “greenie” in the house to make this gift appropriate.
Hey, no one said it would be easy. Success as a cook isn’t easy either, but there is nothing like the satisfied feeling you get when you see your utility bill drop. By monitoring your equipment you can choose better management strategies, like turning it down or off, or getting an appliance timer to limit the on time. Good luck saving energy and cutting your utility bills. I hope you will get the right tools to enjoy it. Remember that energy conservation is a life style and like just like the process of going to the bathroom, you really can’t afford to skip it. Who would want to?
© Mark Daily, 2008
Wednesday, November 26, 2008
Let's Make a big Alternate Electricity Generation Plan
In the early 1900’s American architect and urban planner Daniel H. Burnham said, “Make no little plans. They have no magic to stir men's blood and probably themselves will not be realized. Make big plans. Aim high in hope and work. Remembering that a noble, logical diagram once recorded will not die.”
What’s your Energy Plan? Don’t have one? If you don’t have one why should your local, state or national government have one? Don’t have an energy plan? Why should your electric utility have one? I’ll bet you have an emergency plan for bailing out of your house if it catches on fire. I’ll bet you have a planned route to get to work. Most of us these days have a retirement plan. You probably have some plan for dinner tonight. You have a plan to educate yourself and your children. You may have a plan for what to wear to the office tomorrow. A plan. Hmm.
How would you like it if your local state or national government planned your dinner for you, or your route to work, or your wardrobe? Those of you standing in bread lines after the recent round of employment cut backs may think government planned dinners are a great idea. But let’s take it a step farther. How would you like it if your local government decided that all the people in your neighborhood had to do without electricity every Wednesday? It’s just one day a week for Pete’s sake, what’s the big deal?
Right now stop reading this and walk through your house. Don’t take paper and pen with you but just walk into each room and notice what uses electricity. I have gas heat so I’m all set you might think. Me too, but unless you have a gas powered fan or pump or a gas powered ignition switch, Wednesday means long underwear and winter parka day for both of us.
Ten years ago I did an energy audit for a guy that wanted to really cut his electric bill. My cursory investigation of his billing history showed a very low bill even in subzero high mountain valley January. I was intrigued. How was I going to help this guy save energy, he wasn’t using any. I pulled into the drive-way on the appointed day and as I pulled out my blower door and other equipment this quiet retired school teacher came out of the house wearing a winter parka, gloves with the fingers cut out, a wool watch cap pulled down over his ears, wool pants, insulated boots and a friendly smile. I discovered during my home owner’s interview that he was not dressed for the outdoors. He was dressed the way he always dressed in the winter – inside. He kept thermostats in back rooms at 40 degrees and his main living area thermostats were set at 50 degrees. His other energy saving tips included pulling every other light bulb out of any double bulb fixtures and replacing all remaining bulbs (except one reading lamp) with 25 watt incandescent bulbs. He thought those compact fluorescents were a little pricey. Every drape and curtain that wasn’t in full sun was closed tight. In a perfectly normal American home, I felt like I was creeping through a medieval mountian top monastery instead of a split level ranch house 50 yards off the highway.
Is this what is in store for everyone? Is this what Randy Udall meant when he said, “the challenge in president-elect Obama’s energy plan will be to maintain prosperity”? “We have to be very smart about what kind of investments we make in a new energy supply”. (Dawson, Crested Butte News, November 21, 2008)
Dean Kamen is very smart. The inventor of the Segway and expensive medical equipment, Kamen rules a three acre island off the coast of Connecticut that proclaimed energy independence. He has a plan. It includes the elimination of all incandescent lighting and the installation of wind and solar power.
Samso, Denmark is an island community that’s 40 square miles and a two hour boat ride from the main land. After ten years of community and government collaboration they are closing in on their goal, 100% energy independence. They have a plan. A summary of their plan includes a section on implementation appropriately titled, project design and planning. Their plan included every citizen, and every agency on the island.
“No man is an island, no man is an island…..he’s a peninsula” – Jefferson Airplane
Could your community make an energy plan? Sure it could. But, let’s not make the same mistake we did in the 70’s with our energy planning. OK gas prices are going down and Jim Carter lost the election – problem solved.
Recent headlines blarred, “World Publics Strongly Favor Requiring More Wind and Solar Energy, More Efficiency, Even If It Increases Costs. Most Think It Will Save Money in the Long Run". While some may have cheered the recent findings of the World Public Opinion.org survey I was not impressed. As you read the details of their findings you discover that most people think their government or utility companies should solve the problem.
This problem will never be solved as long as people think the solution is up to someone else.
The solution to meet the growing demands for electricity is not a problem to solve; it’s an ethic to be lived. It should be as much a part of our national ethos as “family values”. In fact it should be a family value. Can you make a difference in all of this? Of course you can. And, you don’t have to freeze in the dark to do it …. at least not yet. Let’s make better choices and better plans about using energy before it comes to that.
"Never doubt that a small group of thoughtful, committed citizens can change the world; indeed, it's the only thing that ever has". - Margaret Mead
What’s your Energy Plan? Don’t have one? If you don’t have one why should your local, state or national government have one? Don’t have an energy plan? Why should your electric utility have one? I’ll bet you have an emergency plan for bailing out of your house if it catches on fire. I’ll bet you have a planned route to get to work. Most of us these days have a retirement plan. You probably have some plan for dinner tonight. You have a plan to educate yourself and your children. You may have a plan for what to wear to the office tomorrow. A plan. Hmm.
How would you like it if your local state or national government planned your dinner for you, or your route to work, or your wardrobe? Those of you standing in bread lines after the recent round of employment cut backs may think government planned dinners are a great idea. But let’s take it a step farther. How would you like it if your local government decided that all the people in your neighborhood had to do without electricity every Wednesday? It’s just one day a week for Pete’s sake, what’s the big deal?
Right now stop reading this and walk through your house. Don’t take paper and pen with you but just walk into each room and notice what uses electricity. I have gas heat so I’m all set you might think. Me too, but unless you have a gas powered fan or pump or a gas powered ignition switch, Wednesday means long underwear and winter parka day for both of us.
Ten years ago I did an energy audit for a guy that wanted to really cut his electric bill. My cursory investigation of his billing history showed a very low bill even in subzero high mountain valley January. I was intrigued. How was I going to help this guy save energy, he wasn’t using any. I pulled into the drive-way on the appointed day and as I pulled out my blower door and other equipment this quiet retired school teacher came out of the house wearing a winter parka, gloves with the fingers cut out, a wool watch cap pulled down over his ears, wool pants, insulated boots and a friendly smile. I discovered during my home owner’s interview that he was not dressed for the outdoors. He was dressed the way he always dressed in the winter – inside. He kept thermostats in back rooms at 40 degrees and his main living area thermostats were set at 50 degrees. His other energy saving tips included pulling every other light bulb out of any double bulb fixtures and replacing all remaining bulbs (except one reading lamp) with 25 watt incandescent bulbs. He thought those compact fluorescents were a little pricey. Every drape and curtain that wasn’t in full sun was closed tight. In a perfectly normal American home, I felt like I was creeping through a medieval mountian top monastery instead of a split level ranch house 50 yards off the highway.
Is this what is in store for everyone? Is this what Randy Udall meant when he said, “the challenge in president-elect Obama’s energy plan will be to maintain prosperity”? “We have to be very smart about what kind of investments we make in a new energy supply”. (Dawson, Crested Butte News, November 21, 2008)
Dean Kamen is very smart. The inventor of the Segway and expensive medical equipment, Kamen rules a three acre island off the coast of Connecticut that proclaimed energy independence. He has a plan. It includes the elimination of all incandescent lighting and the installation of wind and solar power.
Samso, Denmark is an island community that’s 40 square miles and a two hour boat ride from the main land. After ten years of community and government collaboration they are closing in on their goal, 100% energy independence. They have a plan. A summary of their plan includes a section on implementation appropriately titled, project design and planning. Their plan included every citizen, and every agency on the island.
“No man is an island, no man is an island…..he’s a peninsula” – Jefferson Airplane
Could your community make an energy plan? Sure it could. But, let’s not make the same mistake we did in the 70’s with our energy planning. OK gas prices are going down and Jim Carter lost the election – problem solved.
Recent headlines blarred, “World Publics Strongly Favor Requiring More Wind and Solar Energy, More Efficiency, Even If It Increases Costs. Most Think It Will Save Money in the Long Run". While some may have cheered the recent findings of the World Public Opinion.org survey I was not impressed. As you read the details of their findings you discover that most people think their government or utility companies should solve the problem.
This problem will never be solved as long as people think the solution is up to someone else.
The solution to meet the growing demands for electricity is not a problem to solve; it’s an ethic to be lived. It should be as much a part of our national ethos as “family values”. In fact it should be a family value. Can you make a difference in all of this? Of course you can. And, you don’t have to freeze in the dark to do it …. at least not yet. Let’s make better choices and better plans about using energy before it comes to that.
"Never doubt that a small group of thoughtful, committed citizens can change the world; indeed, it's the only thing that ever has". - Margaret Mead
Wednesday, November 19, 2008
Energy Conservation Makes Me Panic
When I hear the phrase “energy conservation” my eyes glaze over; my pulse quickens and my stomach starts doing flip flops. When I hear that phrase, I know I am in for hours of boring lectures that might cover everything from how to drive my car to how to compost my vegetable waste. So, instead of talking about energy conservation, which can cover an infinite number of ways for me to feel bad about my behavior, I want to focus on saving money in two areas that mean something to me -my home electric bill and my home heating bill. I almost always feel better when I spend less money
I am not trying to dis the fine people working on the other parts of energy conservation, but to me, that phrase is too big. Its like have to wade through someone’s entire DNA genome description when all I want to know is, “what color is her hair?” A simple photo or a quick peak would do, right?
So, how do I get that photo or quick peak? Don’t Goggle “energy conservation”. You’ll spend hours looking at stuff that is really interesting but covers too much ground. You have to find a way to focus.
Adding the word “Home” to your goggle search helps focus the field of possibilities. Here is what I found from the first six choices searching for "Home Energy Conservation".
The first choice is powered by Chevron and it got really confusing for me. It went right into MPG and stuff that has nothing to do with my electric or heating bill.
The second choice must have happened because I’m in Indiana. It’s more about donating money than it is about saving money.
The third choice from the Northeast Sustainable Energy Association gets me a little closer to what I want but it’s more about how to build an energy efficient home and I am stuck with the one I have for now – so again, not real helpful.
Finally with the fourth, fifth and sixth choices, I got what I wanted.
Home Energy Saver claims it’s the “first web-based do-it-yourself energy audit tool”. Type in your zip code and start learning what it takes to save utility expenses right away. I liked it and there were lots of other links to get more information on remodeling ideas, “no/low cost” conservation actions and more.
The Home Energy Saver site above is run by the U.S. Department of Energy, Energy Efficiency and Renewable Energy, which sponsors the fifth choice in the Goggle search, the EERE: Energy Savers Home Page. The side bar on the left takes you to details about your house that can help you get a handle on actions you can take to cut your utility bills.
The sixth choice takes you to HOME ENERGY MAGAZINE ONLINE. At first glance it looks like one more request for a subscription, but dig deeper. If you click on the Magazine link at the bottom of the masthead, you get into articles about specific topics utility saving steps. I clicked on the November/December 2008 Thermostat Setbacks- Do they really work and found coverage of a detailed study from Canada that answered every question I ever had about setback thermostats.
I think it’s great that so much attention is landing on the idea of reducing my carbon footprint. But, if ‘m going to make foot prints anywhere, I need some traveling cash. I get my travel money by reducing my utility bill payment footprint. And, I help save the world at the save time.
© 2008 Mark R. Daily
I am not trying to dis the fine people working on the other parts of energy conservation, but to me, that phrase is too big. Its like have to wade through someone’s entire DNA genome description when all I want to know is, “what color is her hair?” A simple photo or a quick peak would do, right?
So, how do I get that photo or quick peak? Don’t Goggle “energy conservation”. You’ll spend hours looking at stuff that is really interesting but covers too much ground. You have to find a way to focus.
Adding the word “Home” to your goggle search helps focus the field of possibilities. Here is what I found from the first six choices searching for "Home Energy Conservation".
The first choice is powered by Chevron and it got really confusing for me. It went right into MPG and stuff that has nothing to do with my electric or heating bill.
The second choice must have happened because I’m in Indiana. It’s more about donating money than it is about saving money.
The third choice from the Northeast Sustainable Energy Association gets me a little closer to what I want but it’s more about how to build an energy efficient home and I am stuck with the one I have for now – so again, not real helpful.
Finally with the fourth, fifth and sixth choices, I got what I wanted.
Home Energy Saver claims it’s the “first web-based do-it-yourself energy audit tool”. Type in your zip code and start learning what it takes to save utility expenses right away. I liked it and there were lots of other links to get more information on remodeling ideas, “no/low cost” conservation actions and more.
The Home Energy Saver site above is run by the U.S. Department of Energy, Energy Efficiency and Renewable Energy, which sponsors the fifth choice in the Goggle search, the EERE: Energy Savers Home Page. The side bar on the left takes you to details about your house that can help you get a handle on actions you can take to cut your utility bills.
The sixth choice takes you to HOME ENERGY MAGAZINE ONLINE. At first glance it looks like one more request for a subscription, but dig deeper. If you click on the Magazine link at the bottom of the masthead, you get into articles about specific topics utility saving steps. I clicked on the November/December 2008 Thermostat Setbacks- Do they really work and found coverage of a detailed study from Canada that answered every question I ever had about setback thermostats.
I think it’s great that so much attention is landing on the idea of reducing my carbon footprint. But, if ‘m going to make foot prints anywhere, I need some traveling cash. I get my travel money by reducing my utility bill payment footprint. And, I help save the world at the save time.
© 2008 Mark R. Daily
Thursday, October 30, 2008
DO IT! (conserve energy & money) Scenerios of the Revolution (the energy revolution)
The Energy Revolution
This is a new revolution. A revolution that lets you tune in to savings and drop out of your energy dependence. No, it won't be televised. But, you will remember it. So, unlike the saying, "if you can remember the 60's, you weren't there", you, will be there to save the planet.
The challenge of energy conservation is in the minute and boring details of everyday living. As with any chronic bad habit (eg. alcoholism, drug addiction, frivolous energy waste, etc.) the first step to a cure is awareness. Nothing goes quicker to the heart of energy waste awareness than two fairly easy steps. One, keep track of the kilowatt hours you use and two, monitor your house appliances and systems to calculate your energy footprint.
Step One: Keep track of your kWh Use
There are several meaningful ways to do this. This easiest way is to set up a computer spreadsheet with columns for months and rows for years. When you get your electric bill, plug in the total kWh from your bill. In less than a year you will start to see patterns in your energy use that can help you make management decisions about energy use. After one year of record keeping you can compare with previous years. This is a great and easy way to see how your energy conservation actions translate into dollar savings, which is the real point of this effort. In three years of record keeping you’ll gain a great understanding of how your house works and document your energy conservation results.
I know a guy that made a form to keep track of his energy use every day. With morning, coffee in hand, he takes a short walk to his electric meter and records the reading. If you were ever suspicious of your electric utility (“no way did I use that much electricity last month - is this bill an estimate?”) this will help reduce those fears. It will also quickly show the impact of energy management decisions in your house. A whole host of energy wasters can be recognized quickly this way. Leaky hot water faucets, stuck thermostats, underground water pipe leaks and failing electric motors have all been some of the things caught early by doing this. So, the effort can save you future headaches by fixing these problems before they turn into bigger problems.
Step Two: Monitor your Stuff
This sounds like a lot of work but really it’s not too bad and the feeling you get from being in control of your energy consumption destiny is well worth the effort. With your Kill-a-watt meter in hand, take turns plugging in different appliances. This is a real eye opener. Plug in each appliance like refrigerators, freezers, television systems, sound systems, computer systems, humidifiers, dehumidifiers, hair dryers, electric blankets, lamps, anything with a cord that plugs into a regular wall outlet. Keep each appliance plugged in for a week. Note the kWh used at the end of the week, divide by seven and multiply by 365 and you have the cost to run that appliance for a year. If you only use that freezer or humidifier for part of the year, adjust your calculations accordingly.
Here’s how to make this easy. Get a calendar that you can write on and hang it in the kitchen. Get a Kill-o-watt Meter and leave it on your kitchen counter. Just leave it there. Then, the next time you head for the refrigerator, before you open the door, unplug the fridge and plug it back in with the Kill-o-watt meter in place. Leave it for a week. (Mark the day and time you set up the meter on your calendar.)In a week pick a new appliance to monitor. Retrieve your meter after recording the kWh used and time elapsed on the previous appliance. Keep going until you have documented energy use on each plug in appliance in your house.
The main point of doing this is to save the planet of course, but the best part of doing this is to save money. Are you freaking out about the world financial turmoil? Are you trying to find that finance vehicle that is secure, gives great returns for your dollars invested and won’t disappear with the latest dip in the DOW? Energy Conservation is it. Money invested in home improvements geared to saving energy shows returns that far exceed anything you can do on Wall Street. If you want a safe place to stick your investment funds, stick them in energy conservation.
DO IT !
What’s stopping you? I know. Just like the anxiety of picking the right stock in today’s market, you’re afraid to make the wrong energy conservation decision. You don’t want to waste money or plunk down big bucks for small savings.
BUILDITSOLAR.COM shows you where to start. While this website sounds like it’s just geared to solar energy enthusiasts, there is a wealth of information about energy conservation. Not only do they cover great ideas on energy conservation, they offer ways to help you pick projects that give the best bang for the buck.
The combination of taking control of your energy use by monitoring and taking action based on a do-able plan for energy conservation will make you feel better about the economy and the environment all at the same time.
This is a new revolution. A revolution that lets you tune in to savings and drop out of your energy dependence. No, it won't be televised. But, you will remember it. So, unlike the saying, "if you can remember the 60's, you weren't there", you, will be there to save the planet.
The challenge of energy conservation is in the minute and boring details of everyday living. As with any chronic bad habit (eg. alcoholism, drug addiction, frivolous energy waste, etc.) the first step to a cure is awareness. Nothing goes quicker to the heart of energy waste awareness than two fairly easy steps. One, keep track of the kilowatt hours you use and two, monitor your house appliances and systems to calculate your energy footprint.
Step One: Keep track of your kWh Use
There are several meaningful ways to do this. This easiest way is to set up a computer spreadsheet with columns for months and rows for years. When you get your electric bill, plug in the total kWh from your bill. In less than a year you will start to see patterns in your energy use that can help you make management decisions about energy use. After one year of record keeping you can compare with previous years. This is a great and easy way to see how your energy conservation actions translate into dollar savings, which is the real point of this effort. In three years of record keeping you’ll gain a great understanding of how your house works and document your energy conservation results.
I know a guy that made a form to keep track of his energy use every day. With morning, coffee in hand, he takes a short walk to his electric meter and records the reading. If you were ever suspicious of your electric utility (“no way did I use that much electricity last month - is this bill an estimate?”) this will help reduce those fears. It will also quickly show the impact of energy management decisions in your house. A whole host of energy wasters can be recognized quickly this way. Leaky hot water faucets, stuck thermostats, underground water pipe leaks and failing electric motors have all been some of the things caught early by doing this. So, the effort can save you future headaches by fixing these problems before they turn into bigger problems.
Step Two: Monitor your Stuff
This sounds like a lot of work but really it’s not too bad and the feeling you get from being in control of your energy consumption destiny is well worth the effort. With your Kill-a-watt meter in hand, take turns plugging in different appliances. This is a real eye opener. Plug in each appliance like refrigerators, freezers, television systems, sound systems, computer systems, humidifiers, dehumidifiers, hair dryers, electric blankets, lamps, anything with a cord that plugs into a regular wall outlet. Keep each appliance plugged in for a week. Note the kWh used at the end of the week, divide by seven and multiply by 365 and you have the cost to run that appliance for a year. If you only use that freezer or humidifier for part of the year, adjust your calculations accordingly.
Here’s how to make this easy. Get a calendar that you can write on and hang it in the kitchen. Get a Kill-o-watt Meter and leave it on your kitchen counter. Just leave it there. Then, the next time you head for the refrigerator, before you open the door, unplug the fridge and plug it back in with the Kill-o-watt meter in place. Leave it for a week. (Mark the day and time you set up the meter on your calendar.)In a week pick a new appliance to monitor. Retrieve your meter after recording the kWh used and time elapsed on the previous appliance. Keep going until you have documented energy use on each plug in appliance in your house.
The main point of doing this is to save the planet of course, but the best part of doing this is to save money. Are you freaking out about the world financial turmoil? Are you trying to find that finance vehicle that is secure, gives great returns for your dollars invested and won’t disappear with the latest dip in the DOW? Energy Conservation is it. Money invested in home improvements geared to saving energy shows returns that far exceed anything you can do on Wall Street. If you want a safe place to stick your investment funds, stick them in energy conservation.
DO IT !
What’s stopping you? I know. Just like the anxiety of picking the right stock in today’s market, you’re afraid to make the wrong energy conservation decision. You don’t want to waste money or plunk down big bucks for small savings.
BUILDITSOLAR.COM shows you where to start. While this website sounds like it’s just geared to solar energy enthusiasts, there is a wealth of information about energy conservation. Not only do they cover great ideas on energy conservation, they offer ways to help you pick projects that give the best bang for the buck.
The combination of taking control of your energy use by monitoring and taking action based on a do-able plan for energy conservation will make you feel better about the economy and the environment all at the same time.
Monday, October 20, 2008
Consumerism and Energy Conservation
I had quite a surprise this morning. Actually it was more like an epiphany, really.
For over fifteen years I have struggled with energy conservation in the electric utility industry. I’m a trained energy auditor and was a certified Home Energy Rating System technician. I visited with electric customers to answer the question, “Why is my energy bill so damned high and what can I do about it?”
I did detailed inventories and spit out detailed reports showing the source of the culprits contributing to high energy bills. I offered suggestions for how these customers could save money. Most of the time, I got a polite thank you. Sometimes I got a reference to another customer wanting to know, “Why is my energy bill so damned high and what can I do about it?” But, only a few cases out of hundreds brought any action on the customer’s part. One customer really loves me. He saved over three hundred dollars on propane the first month after he actually performed the measures I recommended, but, that was the exception.
Generally, customers just kept on doing what they had done before, yelling at family members to “turn off those lights” and “close the damned door – what were you – born in a barn”, and; they kept sending their money to the utility companies.
My epiphany was the result of reading a recent report by a group called ECOALIGN. Their mission is to” .. align corporate and consumer behavior with the future of energy and environment via innovative marketing and communications strategies”.
The report titled Project Energy Code, told me exactly why I couldn’t get any traction with most customers to implement the energy conservation measures I recommended. Maybe this explains why you haven’t taken action either.
The “problem” is a combination of three issues, visibility, ambivalence, and trust, as explained in the report prepared by Pippa Chenevix Trench. Here is my take on what they are getting at.
Visibility- Many of us won’t implement energy saving actions because even if we do, no one will know. Appraisers won’t increase the home’s value. Neighbors won’t make encouraging comments and no one will really be able to tell that we’re going green and saving the planet. It’s hard to brag about something you didn’t use –like energy.
Ambivalence- My dictionary defines Ambivalence as the “existence of mutually conflicting feelings or thoughts such as love or hate about some person (maybe energy auditors), object (like set back thermostats) or idea (like energy conservation). Some people might be thinking, “what’s the use, the planets going down the tubes anyway, why bother”. Or maybe they’re faced with the conflicting choice of paying for a great vacation versus installing more attic insulation. If you read the report you might conclude that the problem could even be deeper and more subtle than that. It could be anthropological.
Trust – This one really got me. Although I had a good working relationship with many customers, I was working for the utility. This fact alone made people wonder why I was recommending actions that would cut the profits from my employer. I talked about how we cared about energy conservation as well as the need to reduce the company’s cost to buy power. The report referenced a piece of research from Arizona that showed that when customers got energy saving ideas from a government agency, 17% of the recipients took energy saving actions. While 0% of recipients that got the same advice from a utility took any action. I guess I should be glad I got as many positive results as I did.
Yet, to save the planet, really save customers money and reduce the growing demand for electricity, we are all going to have to get a lot more successful at selling energy conservation.
I hope you will take the time to read the report yourself. It’s free. I didn’t even have to register or give away any personal information. Reading this report showed me that customer choices are complicated and go way beyond the typical environmentalist accusations that we are all just thoughtless consumers. EcoAlign concludes that our “consumption [is] not out of mindless greed but in response to a complex web of culture and belonging” influences. Wow, if I’d only known.
The Project Energy Code concludes with the call to arms for more research into human behavior as it applies to energy conservation. They say, “there are three areas for future research that stems from the hypotheses described in this essay”:
1. Understanding better how energy consumption and environmental issues are “bundled” within the broader context of people’s day to day lives.
2. Understanding the ways in which information surrounding energy use and decisions over consumer practices flows within and between households and social networks.
3. Identifying ways in which energy efficient behavior can be made more visible and the impacts of different media in communicating this information.
I’ll be thinking a lot about this report and its importance to saving money and the planet at the same time. In the mean time, I hope someone gets working on those three additional areas of research. If the experts are right, energy conservation is still the best bang for the buck and “negawatts” are still worth bragging about to your neighbors.
© 2008 Mark R. Daily
For over fifteen years I have struggled with energy conservation in the electric utility industry. I’m a trained energy auditor and was a certified Home Energy Rating System technician. I visited with electric customers to answer the question, “Why is my energy bill so damned high and what can I do about it?”
I did detailed inventories and spit out detailed reports showing the source of the culprits contributing to high energy bills. I offered suggestions for how these customers could save money. Most of the time, I got a polite thank you. Sometimes I got a reference to another customer wanting to know, “Why is my energy bill so damned high and what can I do about it?” But, only a few cases out of hundreds brought any action on the customer’s part. One customer really loves me. He saved over three hundred dollars on propane the first month after he actually performed the measures I recommended, but, that was the exception.
Generally, customers just kept on doing what they had done before, yelling at family members to “turn off those lights” and “close the damned door – what were you – born in a barn”, and; they kept sending their money to the utility companies.
My epiphany was the result of reading a recent report by a group called ECOALIGN. Their mission is to” .. align corporate and consumer behavior with the future of energy and environment via innovative marketing and communications strategies”.
The report titled Project Energy Code, told me exactly why I couldn’t get any traction with most customers to implement the energy conservation measures I recommended. Maybe this explains why you haven’t taken action either.
The “problem” is a combination of three issues, visibility, ambivalence, and trust, as explained in the report prepared by Pippa Chenevix Trench. Here is my take on what they are getting at.
Visibility- Many of us won’t implement energy saving actions because even if we do, no one will know. Appraisers won’t increase the home’s value. Neighbors won’t make encouraging comments and no one will really be able to tell that we’re going green and saving the planet. It’s hard to brag about something you didn’t use –like energy.
Ambivalence- My dictionary defines Ambivalence as the “existence of mutually conflicting feelings or thoughts such as love or hate about some person (maybe energy auditors), object (like set back thermostats) or idea (like energy conservation). Some people might be thinking, “what’s the use, the planets going down the tubes anyway, why bother”. Or maybe they’re faced with the conflicting choice of paying for a great vacation versus installing more attic insulation. If you read the report you might conclude that the problem could even be deeper and more subtle than that. It could be anthropological.
Trust – This one really got me. Although I had a good working relationship with many customers, I was working for the utility. This fact alone made people wonder why I was recommending actions that would cut the profits from my employer. I talked about how we cared about energy conservation as well as the need to reduce the company’s cost to buy power. The report referenced a piece of research from Arizona that showed that when customers got energy saving ideas from a government agency, 17% of the recipients took energy saving actions. While 0% of recipients that got the same advice from a utility took any action. I guess I should be glad I got as many positive results as I did.
Yet, to save the planet, really save customers money and reduce the growing demand for electricity, we are all going to have to get a lot more successful at selling energy conservation.
I hope you will take the time to read the report yourself. It’s free. I didn’t even have to register or give away any personal information. Reading this report showed me that customer choices are complicated and go way beyond the typical environmentalist accusations that we are all just thoughtless consumers. EcoAlign concludes that our “consumption [is] not out of mindless greed but in response to a complex web of culture and belonging” influences. Wow, if I’d only known.
The Project Energy Code concludes with the call to arms for more research into human behavior as it applies to energy conservation. They say, “there are three areas for future research that stems from the hypotheses described in this essay”:
1. Understanding better how energy consumption and environmental issues are “bundled” within the broader context of people’s day to day lives.
2. Understanding the ways in which information surrounding energy use and decisions over consumer practices flows within and between households and social networks.
3. Identifying ways in which energy efficient behavior can be made more visible and the impacts of different media in communicating this information.
I’ll be thinking a lot about this report and its importance to saving money and the planet at the same time. In the mean time, I hope someone gets working on those three additional areas of research. If the experts are right, energy conservation is still the best bang for the buck and “negawatts” are still worth bragging about to your neighbors.
© 2008 Mark R. Daily
Wednesday, October 15, 2008
Solve the Electricity Generation Crisis with Smarts
“A group won't be smart if its members imitate one another, slavishly follow fads, or wait for someone to tell them what to do. When a group is being intelligent, whether it's made up of ants or attorneys, it relies on its members to do their own part. For those of us who sometimes wonder if it's really worth recycling that extra bottle to lighten our impact on the planet, the bottom line is that our actions matter, even if we don't see how.” – Swarm Theory by Pete Miller, National Geographic.
Swam Theory may be one method to solve the growing crisis for electricity generation in the USA. The concept demonstrates two key features that could bring meaningful results to the challenge of meeting our energy needs.
First, experts and cynics a like seem to agree that our energy needs will be best met by a combination of energy conservation, renewable energy growth and cultivation of existing energy generation systems like coal and nuclear power. This means that we all have a role to play in reducing our energy demands and a role to play in encouraging energy generation diversity. In short your actions at home to conserve energy and your actions in the political arena to encourage wise decision making are very important.
Second, we all must participate in the discussion in order to make the most out of our “smart swarm” of ideas and actions.
How do you get Smart?
Can you live without electricity? Of course you could, but your life would change dramatically for the worse. You would spend more of your time doing mundane chores and less time doing things that make your life what it is today. So, if you can’t live without it, shouldn’t you know something about it? Yet, I frequently get blank stares from smart people when I ask, “how much electricity does your house or business use and what is your cost per kWh”? I use between 300 and 602 kWh per month, lowest in the summer and highest in the winter – in case you wonder if I’ve done my homework. Yes, I know. I could do better, but the national average according to U.S. Energy Information Administration is 888 kWh per month. (thanks Power - Save for setting me straight on this). Oh and I pay $0.13 per kilowatt hour. If you live in Hawaii you pay about $0.22. The nation average in June 2008 was about $0.12 per kWh and rising.
Once you know your energy appetite, find out why you eat what you eat. Everyone is reading grocery product labels these days. Consumers want to know if the product they are buying might come from a tainted batch of garlic from China or the neighborhood organic farm. They want to know if what they are buying is mostly sugar or substance. So it should be with your energy bill. Find out how much energy each appliance eats at your house. Its different for everyone so don’t use your mother-in-laws numbers, get your own. Buy a Kill-A-Watt meter or ask for one for a holiday gift. Start tracking down what you require for energy at your house. Don’t just take the utility companies month meter reading total.
Get smart. Get active. Don’t wait for someone to tell you what to do. Do your own part. It’s not that hard. No one knows your house better than you do.
© Mark Daily, 2008
Swam Theory may be one method to solve the growing crisis for electricity generation in the USA. The concept demonstrates two key features that could bring meaningful results to the challenge of meeting our energy needs.
First, experts and cynics a like seem to agree that our energy needs will be best met by a combination of energy conservation, renewable energy growth and cultivation of existing energy generation systems like coal and nuclear power. This means that we all have a role to play in reducing our energy demands and a role to play in encouraging energy generation diversity. In short your actions at home to conserve energy and your actions in the political arena to encourage wise decision making are very important.
Second, we all must participate in the discussion in order to make the most out of our “smart swarm” of ideas and actions.
How do you get Smart?
Can you live without electricity? Of course you could, but your life would change dramatically for the worse. You would spend more of your time doing mundane chores and less time doing things that make your life what it is today. So, if you can’t live without it, shouldn’t you know something about it? Yet, I frequently get blank stares from smart people when I ask, “how much electricity does your house or business use and what is your cost per kWh”? I use between 300 and 602 kWh per month, lowest in the summer and highest in the winter – in case you wonder if I’ve done my homework. Yes, I know. I could do better, but the national average according to U.S. Energy Information Administration is 888 kWh per month. (thanks Power - Save for setting me straight on this). Oh and I pay $0.13 per kilowatt hour. If you live in Hawaii you pay about $0.22. The nation average in June 2008 was about $0.12 per kWh and rising.
Once you know your energy appetite, find out why you eat what you eat. Everyone is reading grocery product labels these days. Consumers want to know if the product they are buying might come from a tainted batch of garlic from China or the neighborhood organic farm. They want to know if what they are buying is mostly sugar or substance. So it should be with your energy bill. Find out how much energy each appliance eats at your house. Its different for everyone so don’t use your mother-in-laws numbers, get your own. Buy a Kill-A-Watt meter or ask for one for a holiday gift. Start tracking down what you require for energy at your house. Don’t just take the utility companies month meter reading total.
Get smart. Get active. Don’t wait for someone to tell you what to do. Do your own part. It’s not that hard. No one knows your house better than you do.
© Mark Daily, 2008
Wednesday, October 8, 2008
I can say that word, “NUCLEAR”
"The true essence of humankind is kindness. There are other qualities which come from education or knowledge, but it is essential, if one wishes to be a genuine human being and impart satisfying meaning to one's existence, to have a good heart."- Tenzin Gyatso, the 14th Dalai Lama
In the energy debate, clever quips and well placed personal barbs seem to prevail over kindness. I think that is one reason why we haven’t gotten farther along with our energy planning in the USA.
This stumbling block to reasoned discussion is especially vitriolic in the nuclear energy debate where both sides frequently resort to a combination of name calling and bewildering statistics. Doing this makes it hard for the consumer on the street to sort out the facts. It makes most of us reluctant to even enter the debate.
Energy Central is a website that has offered news and commentary on the Electric Utility industry for many years. I believe their aim is to provide as much objective information as possible about this industry and its issues. It’s a great way to hear all sides of the debate on many different utility topics.
One regular contributor, John K. Sutherland, seems to have a pretty good handle on issues relating to Nuclear Energy production in the USA. Sadly, he seems so angry about those opposed to nuclear energy that it is hard to read much of his material. His most recent piece on nuclear energy includes this:
“Nuclear waste, despite the ignorant half-truths and inventions of those who fear it, and despite the fact that we would rather not have it, is one of the best reasons for developing nuclear power relative to any other major reliable source of energy other than hydro. When you add its minimal pollution contributions; its much better safety record than any large energy source; and its improving cost advantages at this time, there should be no contest, yet the emotionally slanted nuclear mythologies keep rearing their heads.”
In his article he includes interesting and helpful numbers that show that nuclear energy wins hands down when it comes to its safety record, waste stream volume reduction and health impacts compared to coal and natural gas. The trouble is, I am usually so pissed off by the time I get to his numbers, I don’t really care if he’s right.
In contrast Amory Lovins has long been an opponent of nuclear energy, until recently Mr. Lovins has tried to gain converts by bludgeoning them with statistics, but a recent piece of his from the Rocky Mountain Institute entitled “Forget Nuclear” does offer a summary that leaves out the laborious numbers and footnote references long enough to let the average person on the street understand a little about what he has been getting at. Yet he too cannot resist that Saturday Night Live jab like, “Jane you ignorant slut” when he concludes his summary opposition with the following comments;
“So why do otherwise well-informed people still consider nuclear power a key element of a sound climate strategy? Not because that belief can withstand analytic scrutiny. Rather, it seems, because of a superficially attractive story, an immensely powerful and effective lobby, a new generation who forgot or never knew why nuclear power failed previously (almost nothing has changed), sympathetic leaders of nearly all main governments, deeply rooted habits and rules that favor giant power plants over distributed solutions and enlarged supply over efficient use, the market winners’ absence from many official databases (which often count only big plants owned by utilities), and lazy reporting by an unduly credulous press.”
It’s really a shame we can’t be more polite to each other when it comes to talking about energy issues. Yet we persist in making sure we spend more time attacking opposing views than trying to understand them.
"Insanity is repeating the same behavior and expecting a different result," said Werner Erhart.
And, in the debate about energy planning for the USA, I think both sides are pretty much insane if they think their approach to this complicated issue is the way to develop a sound energy policy.
© Mark Daily, 2008
In the energy debate, clever quips and well placed personal barbs seem to prevail over kindness. I think that is one reason why we haven’t gotten farther along with our energy planning in the USA.
This stumbling block to reasoned discussion is especially vitriolic in the nuclear energy debate where both sides frequently resort to a combination of name calling and bewildering statistics. Doing this makes it hard for the consumer on the street to sort out the facts. It makes most of us reluctant to even enter the debate.
Energy Central is a website that has offered news and commentary on the Electric Utility industry for many years. I believe their aim is to provide as much objective information as possible about this industry and its issues. It’s a great way to hear all sides of the debate on many different utility topics.
One regular contributor, John K. Sutherland, seems to have a pretty good handle on issues relating to Nuclear Energy production in the USA. Sadly, he seems so angry about those opposed to nuclear energy that it is hard to read much of his material. His most recent piece on nuclear energy includes this:
“Nuclear waste, despite the ignorant half-truths and inventions of those who fear it, and despite the fact that we would rather not have it, is one of the best reasons for developing nuclear power relative to any other major reliable source of energy other than hydro. When you add its minimal pollution contributions; its much better safety record than any large energy source; and its improving cost advantages at this time, there should be no contest, yet the emotionally slanted nuclear mythologies keep rearing their heads.”
In his article he includes interesting and helpful numbers that show that nuclear energy wins hands down when it comes to its safety record, waste stream volume reduction and health impacts compared to coal and natural gas. The trouble is, I am usually so pissed off by the time I get to his numbers, I don’t really care if he’s right.
In contrast Amory Lovins has long been an opponent of nuclear energy, until recently Mr. Lovins has tried to gain converts by bludgeoning them with statistics, but a recent piece of his from the Rocky Mountain Institute entitled “Forget Nuclear” does offer a summary that leaves out the laborious numbers and footnote references long enough to let the average person on the street understand a little about what he has been getting at. Yet he too cannot resist that Saturday Night Live jab like, “Jane you ignorant slut” when he concludes his summary opposition with the following comments;
“So why do otherwise well-informed people still consider nuclear power a key element of a sound climate strategy? Not because that belief can withstand analytic scrutiny. Rather, it seems, because of a superficially attractive story, an immensely powerful and effective lobby, a new generation who forgot or never knew why nuclear power failed previously (almost nothing has changed), sympathetic leaders of nearly all main governments, deeply rooted habits and rules that favor giant power plants over distributed solutions and enlarged supply over efficient use, the market winners’ absence from many official databases (which often count only big plants owned by utilities), and lazy reporting by an unduly credulous press.”
It’s really a shame we can’t be more polite to each other when it comes to talking about energy issues. Yet we persist in making sure we spend more time attacking opposing views than trying to understand them.
"Insanity is repeating the same behavior and expecting a different result," said Werner Erhart.
And, in the debate about energy planning for the USA, I think both sides are pretty much insane if they think their approach to this complicated issue is the way to develop a sound energy policy.
© Mark Daily, 2008
Friday, October 3, 2008
Fight High Utility Bills - IT’S WINTER- AGAIN - ARE YOU READY?
Yep, you know. You should have been thinking about this in August. Who wants to think about winter when you could be basking in the August sun on some nice back country trail, or well placed street furniture? Even in the coldest parts of the nation, it won’t get below zero for another thirty days. You still have plenty of time to winterize your house or business. However, for those of you freaking out about the cool October evenings, you’ll find the following check lists an easy way to button-up the cabin before winter gets serious.
Four Things to Remember Winter
1. Heating degree days per year make a difference in the actions you need to take to prepare for winter. A heating degree is any day that the average daily temperature is below 65 degrees. Anchorage, Alaska has an average of 10,130 heating degree days. Boston, Massachusetts has 5,630 heating degree days. The same house, with the same appliances and equipment, the same number of people and pets – doing the same activities, will have an Anchorage heating bill almost twice as high as a Boston family with the same utility rates. Find your heating degree days here.
2. Moisture Problems occur in dry as well as moist climates if you don’t pay attention to gaps in insulation. When warm moist house air meets cold surfaces, the moisture drops out of the air and condenses on that cold surface. This can cause mold and mildew to form. It reduces the insulation ability of many insulation materials. It can also rot wood.
3. Winter energy bills are higher in the winter even if you’re not there. Studies show more winter energy use in vacant homes because no one is cooking, living, caring for pets, turning on lights or doing things that provide “free” secondary heat.
4. Even in winter, sunshine is your friend. Use it wisely, and get free heat. Many people cancel out the benefits of free sunshine by leaving window coverings closed on sunny days.
The Big Four Energy Bill Sources
Target these four areas to save money off your utility bill. Sure turning off the lights is a good idea, because it’s easy, but even if you grope around in the dark all winter long, you won’t save as much on lighting fixes as you will by insulating heating ducts and sealing cold air cracks.
1) Space Heating Systems (60 to 75 percent of the average home energy load);
2) Domestic water heating (25 to 30 percent of the average home energy load);
3) Kitchen and home Appliances (10 to 15 percent of the average home energy load);
4) Lighting (5 to 7 percent of the average home energy load);
Space Heating Check List- Nine steps to lower energy bills
1) Inspect insulation. Repair crawl space insulation that may have fallen down. Replace attic insulation that may have been moved for summer construction projects. Compare your insulation levels to recommended standards for your climate and consider adding insulation if your home doesn’t meet those standards. Insulate heating ducts or hydronic fluid pipes.
2) Plug the crawl space vents that you opened last spring. Fiberglass batt insulation, lightly stuffed in a small trash bag makes a good vent plug that will fit between the floor joists of your crawl space.
3) Check heat tape and replace if there is any sign of damage. UL listed heat tape should be used and installed strictly according to the manufacturer’s directions. Non- UL listed heat tape should not be used at all. Heat tape is much less expensive to use for freeze protection than a space heater. Each foot of heat tape is usually rated at 3 watts per foot. So, for the operating costs of a 1,000 watt space heater you can run 333 feet of heat tape.
4) Clean dust and dirt from all types of heaters, supply vents and air registers. Also be sure to clean return air vents and baseboard heater fins for both gas and electric baseboard heaters. Replace or clean furnace air filters before starting your furnace for the season and do it again every two months during the heating season.
5) Clear the area around heaters and all forced air duct vents. Combustible material within four inches of electric baseboard heaters is a fire hazard. The more clearance you give your heaters and vents the better the air will circulate and the quicker your rooms will warm up, lowering your heating costs.
6) Close and latch windows. Unlatched windows allow windy days to pull heat from your house. Infiltration from building envelope openings can account for as much as 40% of your heating expense.
7) Clean south facing windows and remove screens. This step improves solar gain by as much as 10%. Why pay for heat when you can get it from the sun for free?
8) Install storm windows and repair any broken glass. Add plastic or glass storm windows to any single pane glass. Doing this cuts your heat loss from windows in half.
9) Check the weather-stripping around exterior doors and windows. Repair damage and fill gaps with additional material.
Domestic Water Heating Check List - Six Steps to longer water heater life and lower energy bills
1) Flush sediments from your water heater at least once a year.
2) Check both thermostat settings if you have an electric water heater. I recommend settings of 120 degrees for both thermostats. Always set both thermostats at the same setting.
3) Add an insulating blanket to your water heater unless your water heater has foam insulation or has factory warnings against adding insulation. Shoot for a total R-Value of R-16 or better. Electric water heaters can be insulated on top for additional heat retention. If your water heater lives in the garage, keep that big garage door closed as much as possible.
4) Check hot water pipes in the crawl space or other un-heated areas. Insulate the first three feet of both the cold and hot water pipes that connect to the tank itself. I’ve insulated all of my hot water pipes. Doing that gets hot water to my shower faster, saving water and water heating expense.
5) Adding a timer to your electric water heater can cut unwanted stand by loses when you are away at work or sleeping. This can cut your water heating costs by one third. You’ll probably have to hire an electrician to do this.
6) Check to see that your shower heads and sink fixtures are low flow fixtures rated at 2-3 gallons per minute (gpm).
Appliance Check List - Four Steps to Controlling Unruly Appliances and saving dollars
1) Specialty Appliances like water bed heaters, electric blankets, Jacuzzi’s, steam showers, and engine block heaters can often use more energy than typical home appliances like refrigerators and washing machines. Make a mental note of the wattage of all of your appliances and get a feel for how long they are on. Watts divided by 1000 equals kilowatts (KW); KW times the “time on” equals kilo-Watt hours which are the units you get billed for. Kilo-Watt Hours times your current electric rate equals the amount that you will pay on your bill for that appliance.
2) Keep all appliances clean. Clean around refrigerator and freezer compressors and backs. Clean appliances use less energy.
3) Appliance timers are especially good for reducing energy use on engine block heaters, stock tank heaters, hot tubs and other specialty appliances that don’t really need to be on 24 hours a day.
4) Food freezes at refrigerator temperatures below 30 degrees. There is no need to keep your freezer colder than that unless you are doing cryogenic experiments. Refrigerator compartments only need to be in the 40 degree range to keep most foods fresh. The setting knobs on all refrigerators and freezers are worthless. Use a thermometer to check out your temperature settings.
Lighting Check List- Five Steps to a Brighter and less expensive winter
1. Cleaning lighting fixtures, reflectors and bulbs gets more light output per unit of energy used.
2. Consider replacing incandescent light bulbs that are on for more than four hours per day with compact fluorescent bulbs.
3. Consider replacing exterior incandescent bulbs with halogen bulbs. They work well at cold temperatures and cut energy use.
4. Replace incandescent holiday lights with LED holiday lights.
5. Remember to turn lights off when you leave the room or get timers and motion detectors to do it for you.
Do you have other ideas that have saved you money on your utility bill? If you have and you can prove it, I’d like to hear about your experience.
© Mark Richard Daily, 2008
Four Things to Remember Winter
1. Heating degree days per year make a difference in the actions you need to take to prepare for winter. A heating degree is any day that the average daily temperature is below 65 degrees. Anchorage, Alaska has an average of 10,130 heating degree days. Boston, Massachusetts has 5,630 heating degree days. The same house, with the same appliances and equipment, the same number of people and pets – doing the same activities, will have an Anchorage heating bill almost twice as high as a Boston family with the same utility rates. Find your heating degree days here.
2. Moisture Problems occur in dry as well as moist climates if you don’t pay attention to gaps in insulation. When warm moist house air meets cold surfaces, the moisture drops out of the air and condenses on that cold surface. This can cause mold and mildew to form. It reduces the insulation ability of many insulation materials. It can also rot wood.
3. Winter energy bills are higher in the winter even if you’re not there. Studies show more winter energy use in vacant homes because no one is cooking, living, caring for pets, turning on lights or doing things that provide “free” secondary heat.
4. Even in winter, sunshine is your friend. Use it wisely, and get free heat. Many people cancel out the benefits of free sunshine by leaving window coverings closed on sunny days.
The Big Four Energy Bill Sources
Target these four areas to save money off your utility bill. Sure turning off the lights is a good idea, because it’s easy, but even if you grope around in the dark all winter long, you won’t save as much on lighting fixes as you will by insulating heating ducts and sealing cold air cracks.
1) Space Heating Systems (60 to 75 percent of the average home energy load);
2) Domestic water heating (25 to 30 percent of the average home energy load);
3) Kitchen and home Appliances (10 to 15 percent of the average home energy load);
4) Lighting (5 to 7 percent of the average home energy load);
Space Heating Check List- Nine steps to lower energy bills
1) Inspect insulation. Repair crawl space insulation that may have fallen down. Replace attic insulation that may have been moved for summer construction projects. Compare your insulation levels to recommended standards for your climate and consider adding insulation if your home doesn’t meet those standards. Insulate heating ducts or hydronic fluid pipes.
2) Plug the crawl space vents that you opened last spring. Fiberglass batt insulation, lightly stuffed in a small trash bag makes a good vent plug that will fit between the floor joists of your crawl space.
3) Check heat tape and replace if there is any sign of damage. UL listed heat tape should be used and installed strictly according to the manufacturer’s directions. Non- UL listed heat tape should not be used at all. Heat tape is much less expensive to use for freeze protection than a space heater. Each foot of heat tape is usually rated at 3 watts per foot. So, for the operating costs of a 1,000 watt space heater you can run 333 feet of heat tape.
4) Clean dust and dirt from all types of heaters, supply vents and air registers. Also be sure to clean return air vents and baseboard heater fins for both gas and electric baseboard heaters. Replace or clean furnace air filters before starting your furnace for the season and do it again every two months during the heating season.
5) Clear the area around heaters and all forced air duct vents. Combustible material within four inches of electric baseboard heaters is a fire hazard. The more clearance you give your heaters and vents the better the air will circulate and the quicker your rooms will warm up, lowering your heating costs.
6) Close and latch windows. Unlatched windows allow windy days to pull heat from your house. Infiltration from building envelope openings can account for as much as 40% of your heating expense.
7) Clean south facing windows and remove screens. This step improves solar gain by as much as 10%. Why pay for heat when you can get it from the sun for free?
8) Install storm windows and repair any broken glass. Add plastic or glass storm windows to any single pane glass. Doing this cuts your heat loss from windows in half.
9) Check the weather-stripping around exterior doors and windows. Repair damage and fill gaps with additional material.
Domestic Water Heating Check List - Six Steps to longer water heater life and lower energy bills
1) Flush sediments from your water heater at least once a year.
2) Check both thermostat settings if you have an electric water heater. I recommend settings of 120 degrees for both thermostats. Always set both thermostats at the same setting.
3) Add an insulating blanket to your water heater unless your water heater has foam insulation or has factory warnings against adding insulation. Shoot for a total R-Value of R-16 or better. Electric water heaters can be insulated on top for additional heat retention. If your water heater lives in the garage, keep that big garage door closed as much as possible.
4) Check hot water pipes in the crawl space or other un-heated areas. Insulate the first three feet of both the cold and hot water pipes that connect to the tank itself. I’ve insulated all of my hot water pipes. Doing that gets hot water to my shower faster, saving water and water heating expense.
5) Adding a timer to your electric water heater can cut unwanted stand by loses when you are away at work or sleeping. This can cut your water heating costs by one third. You’ll probably have to hire an electrician to do this.
6) Check to see that your shower heads and sink fixtures are low flow fixtures rated at 2-3 gallons per minute (gpm).
Appliance Check List - Four Steps to Controlling Unruly Appliances and saving dollars
1) Specialty Appliances like water bed heaters, electric blankets, Jacuzzi’s, steam showers, and engine block heaters can often use more energy than typical home appliances like refrigerators and washing machines. Make a mental note of the wattage of all of your appliances and get a feel for how long they are on. Watts divided by 1000 equals kilowatts (KW); KW times the “time on” equals kilo-Watt hours which are the units you get billed for. Kilo-Watt Hours times your current electric rate equals the amount that you will pay on your bill for that appliance.
2) Keep all appliances clean. Clean around refrigerator and freezer compressors and backs. Clean appliances use less energy.
3) Appliance timers are especially good for reducing energy use on engine block heaters, stock tank heaters, hot tubs and other specialty appliances that don’t really need to be on 24 hours a day.
4) Food freezes at refrigerator temperatures below 30 degrees. There is no need to keep your freezer colder than that unless you are doing cryogenic experiments. Refrigerator compartments only need to be in the 40 degree range to keep most foods fresh. The setting knobs on all refrigerators and freezers are worthless. Use a thermometer to check out your temperature settings.
Lighting Check List- Five Steps to a Brighter and less expensive winter
1. Cleaning lighting fixtures, reflectors and bulbs gets more light output per unit of energy used.
2. Consider replacing incandescent light bulbs that are on for more than four hours per day with compact fluorescent bulbs.
3. Consider replacing exterior incandescent bulbs with halogen bulbs. They work well at cold temperatures and cut energy use.
4. Replace incandescent holiday lights with LED holiday lights.
5. Remember to turn lights off when you leave the room or get timers and motion detectors to do it for you.
Do you have other ideas that have saved you money on your utility bill? If you have and you can prove it, I’d like to hear about your experience.
© Mark Richard Daily, 2008
Tuesday, September 23, 2008
Solar Energy Can't do it alone- What about Nuclear Energy?
Proponents of alternate energy generation generally support “green” technologies like solar and wind. These same green advocates often shun nuclear energy and point to a long list of dangers inherent in that technology. Yet blind support of solar power is like demanding that you use rubber bands to power you car. For solar to work, we'll need to make big adjustments in our homes and lifestyles.
Solar powered electricity generation made up less than 1% of the generation mix in 20007. According to the Solar Electric Power Association, there were “473MW [megawatts] of grid-connected photovoltaics installed throughout the entirety of the U.S. as of the end of 2007”. Assuming that this 473 MW of grid tied resource got an average of 6 hours of sun each day, they would produce about 1,035,870 Megawatt hours of electricity in a year.
This is not merely a numbers game. We won’t meet our energy needs by doubling or tripling or even quadrupling our photovoltaic generation.
Nuclear electricity generation produced record levels in 2007. Energy Information Administration data show that nuclear generation climbed slightly this May. “Nuclear output rose 13 percent in May 2008 compared with the preceding month. Even with the increase, generation was slightly below May 2007 (less than half a percent difference). Cumulative generation for the first five months of 2008 is slightly over one percent lower than in the record year of 2007.”
In 2007, 806,486,978 Megawatt Hours of electricity was produced by nuclear reactors in the USA. Thirty two states produce a portion of their electricity from nuclear power and 20% of all electricity produced in the USA came from nuclear reactor generation in 2007.
The challenge here when talking about ways to solve climate change and reduce green house gas emissions tied to electric energy production is the big gap between what the public seems to want for power generation -clean power- versus what the public wants in terms of the growing electricity demand.
One typical residential solar photovoltaic setup with twelve 100 watt PV collectors in a sunny part of the USA might be capable of producing 216 kilowatt hours per month or 2.5 Megawatt hours per year.
The South Texas Project 1 nuclear facility produced almost 12 million megawatt hours in 2007. The smallest nuclear generation facility, Point Beach 1 in Wisconsin produced almost 4 million megawatt hours. It would take over 18,000 homes running 1.2 KW photovoltaic systems in a sunny climate to come anywhere close to the generation output of the smallest nuclear facility.
Let’s face it folks. If we want to maintain our current standard of living it will take more than solar power to run the nation. Actually, it will take advancements in every electricity generation sector plus a lot of conservation success to keep up with projected electricity demand.
William Tucker offers his perspective for going nuclear in his interesting The Case for Terrestrial (a.k.a. Nuclear) Energy. You may not want to hear it, but you really should try to understand all sides in our great energy debate.
For more nuclear facts visit the International Atomic Energy Agency and read some IAEA Newsletters.
Solar powered electricity generation made up less than 1% of the generation mix in 20007. According to the Solar Electric Power Association, there were “473MW [megawatts] of grid-connected photovoltaics installed throughout the entirety of the U.S. as of the end of 2007”. Assuming that this 473 MW of grid tied resource got an average of 6 hours of sun each day, they would produce about 1,035,870 Megawatt hours of electricity in a year.
This is not merely a numbers game. We won’t meet our energy needs by doubling or tripling or even quadrupling our photovoltaic generation.
Nuclear electricity generation produced record levels in 2007. Energy Information Administration data show that nuclear generation climbed slightly this May. “Nuclear output rose 13 percent in May 2008 compared with the preceding month. Even with the increase, generation was slightly below May 2007 (less than half a percent difference). Cumulative generation for the first five months of 2008 is slightly over one percent lower than in the record year of 2007.”
In 2007, 806,486,978 Megawatt Hours of electricity was produced by nuclear reactors in the USA. Thirty two states produce a portion of their electricity from nuclear power and 20% of all electricity produced in the USA came from nuclear reactor generation in 2007.
The challenge here when talking about ways to solve climate change and reduce green house gas emissions tied to electric energy production is the big gap between what the public seems to want for power generation -clean power- versus what the public wants in terms of the growing electricity demand.
One typical residential solar photovoltaic setup with twelve 100 watt PV collectors in a sunny part of the USA might be capable of producing 216 kilowatt hours per month or 2.5 Megawatt hours per year.
The South Texas Project 1 nuclear facility produced almost 12 million megawatt hours in 2007. The smallest nuclear generation facility, Point Beach 1 in Wisconsin produced almost 4 million megawatt hours. It would take over 18,000 homes running 1.2 KW photovoltaic systems in a sunny climate to come anywhere close to the generation output of the smallest nuclear facility.
Let’s face it folks. If we want to maintain our current standard of living it will take more than solar power to run the nation. Actually, it will take advancements in every electricity generation sector plus a lot of conservation success to keep up with projected electricity demand.
William Tucker offers his perspective for going nuclear in his interesting The Case for Terrestrial (a.k.a. Nuclear) Energy. You may not want to hear it, but you really should try to understand all sides in our great energy debate.
For more nuclear facts visit the International Atomic Energy Agency and read some IAEA Newsletters.
Wednesday, September 17, 2008
Take Action to Support Distributed Renewable Energy Generation
So, you want to install a solar photovoltaic system on your roof and join those taking action to reverse climate change. You want to be part of the solution to the growing gap between energy demand and new power plant construction by installing distributed alternate energy generation. You’ve consulted your Special 30th Anniversary Edition of the Real Goods Solar Living Source Book, trimmed your home’s energy demand as much as you can without freezing in the dark and you are ready to order your equipment.
Wait! Have you contacted your local utility?
Almost every utility in the nation has some type of policy or regulation that could impact your ability to generate your own power from your own alternate energy system. Utility policies are a function of State regulations and individual utility company choices. Before you dump that list of PV parts into your checkout basket, contact your utility to make sure you can do what you want to do without being surprised by extra fees, technical restrictions or a hostile utility engineer that doesn’t get what you are trying to do.
The Network for New Energy Choices grades States on net-metering and interconnection laws and gives them an “A” through “F” score on how well they assist consumers with installing alternate energy distributed generation systems. The grades are based on a comparison with recommended regulations featured in the model regulations from the Interstate Renewable Energy Council.
Here are the results from the Network for New Energy Choices report.
Net Metering Grades
A IREC Model , New Jersey, Colorado, Pennsylvania, Maryland, California.
B Oregon, Delaware, Iowa, Nevada, Connecticut, Ohio, New Mexico.
C Arkansas, New Hampshire, Rhode Island, Hawaii, Maine, Louisiana, Virginia, North Dakota, Minnesota, Massachusetts, Montana, Vermont, Missouri.
D Washington, New York, Texas, Kentucky, Michigan, Wyoming, Oklahoma, Indiana, West Virginia.
F Utah, D.C., Georgia, North Carolina, Wisconsin.
Interconnection Grades
A IREC Model.
B New Jersey, Arizona.
C California, Ohio, Texas, New York, Colorado, Oregon* , Massachusetts, Georgia, New Mexico* , Vermont, Minnesota.
D Rhode Island, Wisconsin, West Virginia, Arkansas, New Hampshire, Virginia, Iowa, Maryland*, Montana, Michigan, Indiana, Pennsylvania, Connecticut.
F North Carolina, D.C., Wyoming, Louisiana, Delaware, Hawaii, Utah, Washington, Missouri.
The Network for New Energy Choices offers these definitions to explain the difference between interconnection and net-metering and their report offers more details showing what makes a good regulation.
Interconnection – the technical rules for customers to “plug in” to the grid.
Net Metering – the billing arrangement by which customers realize savings from their systems, here 1-kWh generated by the customer has the exact same value as 1-kWh consumed by the customer.
States scoring an A or B are obviously trying to allow distributed alternate energy generators to start-up in their states. States scoring a C are pretending that they care about distributed alternate energy generators. And, States scoring a D or F obviously aren’t interested in having distributed alternative energy play any roll in meeting their electricity demands. The interesting thing is that states scoring A’s are finding spin-off results that improve their economies, reduce costs for customers, and reap financial benefits for their utilities. States scoring D’s and F’s are telling manufacturing industries, businesses and citizens to forget about making any money in the new economy where green businesses are growing new jobs and creating new business opportunities.
The killer in all of this is that a comparison of the top ten states by non-farm employees working in the manufacturing industry are in many cases, the same states that score the lowest on net-metering and interconnection support.
Rank. State – Net-metering Grade/ Interconnection Grade
1. Indiana - D/D
2. Wisconsin - F/D
3. Arkansas - C/D
4. Iowa - B/D
5. Mississippi- no grade/no grade
6. Alabama – no grade/no grade
7. Michigan - D/D
8. Ohio - B/C
9. Tennesse- no grade/no grade
10.Kentucky- D/no grade
So, the states potentially best equipped to make and supply distributed generation equipment and reap the corresponding economic benefits are shooting themselves in the foot when it comes to alternate energy development.
If you live in a State scoring anything less than a B, it’s time to take action. In less time than it took to read this, you can email your state representatives. Tell them you support distributed alternate energy and you think it’s time that they woke up and supported it too. Tell them you’re tired of being a C student- or worse, and you want to get A’s the next time the Network for New Energy Choices scores your State.
To find more details about your utility or your State and how they treat distributed alternate energy generation, visit the Database of State Incentives for Renewables & efficiency (DSIRE) web site and see how they stack up.
Wait! Have you contacted your local utility?
Almost every utility in the nation has some type of policy or regulation that could impact your ability to generate your own power from your own alternate energy system. Utility policies are a function of State regulations and individual utility company choices. Before you dump that list of PV parts into your checkout basket, contact your utility to make sure you can do what you want to do without being surprised by extra fees, technical restrictions or a hostile utility engineer that doesn’t get what you are trying to do.
The Network for New Energy Choices grades States on net-metering and interconnection laws and gives them an “A” through “F” score on how well they assist consumers with installing alternate energy distributed generation systems. The grades are based on a comparison with recommended regulations featured in the model regulations from the Interstate Renewable Energy Council.
Here are the results from the Network for New Energy Choices report.
Net Metering Grades
A IREC Model , New Jersey, Colorado, Pennsylvania, Maryland, California.
B Oregon, Delaware, Iowa, Nevada, Connecticut, Ohio, New Mexico.
C Arkansas, New Hampshire, Rhode Island, Hawaii, Maine, Louisiana, Virginia, North Dakota, Minnesota, Massachusetts, Montana, Vermont, Missouri.
D Washington, New York, Texas, Kentucky, Michigan, Wyoming, Oklahoma, Indiana, West Virginia.
F Utah, D.C., Georgia, North Carolina, Wisconsin.
Interconnection Grades
A IREC Model.
B New Jersey, Arizona.
C California, Ohio, Texas, New York, Colorado, Oregon* , Massachusetts, Georgia, New Mexico* , Vermont, Minnesota.
D Rhode Island, Wisconsin, West Virginia, Arkansas, New Hampshire, Virginia, Iowa, Maryland*, Montana, Michigan, Indiana, Pennsylvania, Connecticut.
F North Carolina, D.C., Wyoming, Louisiana, Delaware, Hawaii, Utah, Washington, Missouri.
The Network for New Energy Choices offers these definitions to explain the difference between interconnection and net-metering and their report offers more details showing what makes a good regulation.
Interconnection – the technical rules for customers to “plug in” to the grid.
Net Metering – the billing arrangement by which customers realize savings from their systems, here 1-kWh generated by the customer has the exact same value as 1-kWh consumed by the customer.
States scoring an A or B are obviously trying to allow distributed alternate energy generators to start-up in their states. States scoring a C are pretending that they care about distributed alternate energy generators. And, States scoring a D or F obviously aren’t interested in having distributed alternative energy play any roll in meeting their electricity demands. The interesting thing is that states scoring A’s are finding spin-off results that improve their economies, reduce costs for customers, and reap financial benefits for their utilities. States scoring D’s and F’s are telling manufacturing industries, businesses and citizens to forget about making any money in the new economy where green businesses are growing new jobs and creating new business opportunities.
The killer in all of this is that a comparison of the top ten states by non-farm employees working in the manufacturing industry are in many cases, the same states that score the lowest on net-metering and interconnection support.
Rank. State – Net-metering Grade/ Interconnection Grade
1. Indiana - D/D
2. Wisconsin - F/D
3. Arkansas - C/D
4. Iowa - B/D
5. Mississippi- no grade/no grade
6. Alabama – no grade/no grade
7. Michigan - D/D
8. Ohio - B/C
9. Tennesse- no grade/no grade
10.Kentucky- D/no grade
So, the states potentially best equipped to make and supply distributed generation equipment and reap the corresponding economic benefits are shooting themselves in the foot when it comes to alternate energy development.
If you live in a State scoring anything less than a B, it’s time to take action. In less time than it took to read this, you can email your state representatives. Tell them you support distributed alternate energy and you think it’s time that they woke up and supported it too. Tell them you’re tired of being a C student- or worse, and you want to get A’s the next time the Network for New Energy Choices scores your State.
To find more details about your utility or your State and how they treat distributed alternate energy generation, visit the Database of State Incentives for Renewables & efficiency (DSIRE) web site and see how they stack up.
Monday, September 8, 2008
Getting to the Dream- Reliable Distributed Renewable Energy Generation
In order to move the idea of small scale renewable energy forward for the every-day home owner in a way that makes a resource contribution to utilities, three things need to happen.
First there needs to be willing homeowners wanting to install distributed generation equipment like wind, solar or biomass generation on their homes. As part of this concept they also need to be interconnected to the grid to make the output of their generators or excess kWh, available to the grid.
Next there needs to be effective, clear and fair state regulations that define net-metering and interconnection requirements. These regulations must not penalize homeowners who want to be distributed system generators or place unfair burdens on compliance.
And finally there have to be utilities willing to adopt and implement programs for those customers or willing homeowners.
To make small scale renewable energy more than just a pipe dream, communities, utilities, state regulators and the nation need to move forward equally on all three fronts.
Willing Homeowners
So far, few homeowners have elected to install renewable energy equipment on their own. Most residential installations nationwide have taken advantage of state or local utility incentives that help homeowners cover some of the estimated $15,000 -25,000 installation and interconnections expenses.
States leading the way in this area like New Jersey and Colorado are struggling with ways to provide incentives without raising rates for all electric rate payers. In addition to the issue of incentives and rebates, the issue of homeowner education is a big issue. Too many homeowners have unrealistic expectations about the amount of money to be made selling excess power back to utilities even in areas with strong utility support for these systems.
These homeowners not only need to be willing to install the equipment on their homes but they need to be willing to monitor their systems and reassure their local utility that they won’t become a danger to themselves, their neighbors or the electric grid itself. A great source of practical self education information is available at Real Goods . They sell a book called the Solar Living Source Book that really is as they claim “the bible on renewable energy”. You can’t be serious about alternative energy and green power if you don’t have one on your book shelf. I have several versions and each new addition has great tips on getting the rubber to meet the road – so to speak.
Supportive State Regulations
In many states with willing and well educated homeowners you may face a list of regulatory hurdles that are more designed to protect myopic utilities, coal producers and the status quo then they are likely to support the installation of interconnected distributed generation. The two key areas of regulatory support are in net-metering regulations and interconnection requirements.
Onerous insurance or safety disconnect requirements can unnecessarily stifle willing homeowners before they even begin buying equipment. Some states however, like New Jersey, Colorado and Pennsylvania are working out these details in a way that protects public safety, assures utilities of safe interconnection and maintenance practices and supports small scale renewable distributed generation. The Network for New Energy Choices provides up to date analysis and reporting on statewide net-metering and interconnection rules. See their report Freeing the Grid: 2007 Edition.
“As of September 2007, thirty-nine states had adopted statewide programs that established rules for compensating consumers who own grid-tied renewable-energy systems. These programs award owners of small, grid-tied renewables the same savings as one would expect from conserving energy on-site.” – Freeing the Grid; Report No. 02-07 November 2007
Progressive Uilities
Utilities have a long history of making excuses for not supporting net-metering or distributed generation connections to the grid, yet for those utilities that have seen the light, customers are helping to meet the growing need for electricity in a way that actually saves utilities money in reduced infrastructure, improved reliability and deferred generation and transmission improvements . One of the leaders in small system residential solar development is the Sacramento Municipal Utility District (SMUD). “SMUD offers an incentive of $2.50 per watt, based on system performance (orientation, array, tilt and shade). The incentive will be paid to the approved PV contractor and should be reflected in the contractor's bid to the customer.”
What is the incentive for utilities to support distributed renewable energy generation? In the long run it will be survival, but in the short run its just money and reliability. In my last post I referred to the North American Reliability Corporation’s Long Term Reliability Assessment conclusions. They discuss electric power shortages in as little as two years. No matter which source you consult, everyone agrees that even with major conservation efforts, there will be a shortage of power. By promoting distributed generation, utilities add resources without the expense of generation and transmission.
Without the three pronged dedication of homeowners willing to dig into their own pockets, State regulator’s supporting reasonable enabling legislation and local utility support and cooperation, the green power revolution will choke on unfulfilled expectations. There are positive signs that all three key actors have learned from past mistake and are working toward a more supportive and measured approach to small scale distributed generation.
The recent Coop America Utility Solar Assessment (USA) Study summary says, “For the first time in history, a confluence of forces is coming together — solar technology developments, conventional energy price increases, aging transmission and distribution infrastructure, climate concerns, security issues, and others — that bring the dramatic worldwide growth of solar increasingly to center stage. In this rapidly changing energy landscape, the 10 percent goal is truly within reach.”
Next week I’ll go into more detail about utility company attitudes towards interconnection requirements and net-metering.
Hey. My hit counter says someone is reading this. What do you think ? Post a comment. If you have a question about energy conservation or renewable energy ask me, I'll try to find objective answers.
© Mark Daily, 2008
First there needs to be willing homeowners wanting to install distributed generation equipment like wind, solar or biomass generation on their homes. As part of this concept they also need to be interconnected to the grid to make the output of their generators or excess kWh, available to the grid.
Next there needs to be effective, clear and fair state regulations that define net-metering and interconnection requirements. These regulations must not penalize homeowners who want to be distributed system generators or place unfair burdens on compliance.
And finally there have to be utilities willing to adopt and implement programs for those customers or willing homeowners.
To make small scale renewable energy more than just a pipe dream, communities, utilities, state regulators and the nation need to move forward equally on all three fronts.
Willing Homeowners
So far, few homeowners have elected to install renewable energy equipment on their own. Most residential installations nationwide have taken advantage of state or local utility incentives that help homeowners cover some of the estimated $15,000 -25,000 installation and interconnections expenses.
States leading the way in this area like New Jersey and Colorado are struggling with ways to provide incentives without raising rates for all electric rate payers. In addition to the issue of incentives and rebates, the issue of homeowner education is a big issue. Too many homeowners have unrealistic expectations about the amount of money to be made selling excess power back to utilities even in areas with strong utility support for these systems.
These homeowners not only need to be willing to install the equipment on their homes but they need to be willing to monitor their systems and reassure their local utility that they won’t become a danger to themselves, their neighbors or the electric grid itself. A great source of practical self education information is available at Real Goods . They sell a book called the Solar Living Source Book that really is as they claim “the bible on renewable energy”. You can’t be serious about alternative energy and green power if you don’t have one on your book shelf. I have several versions and each new addition has great tips on getting the rubber to meet the road – so to speak.
Supportive State Regulations
In many states with willing and well educated homeowners you may face a list of regulatory hurdles that are more designed to protect myopic utilities, coal producers and the status quo then they are likely to support the installation of interconnected distributed generation. The two key areas of regulatory support are in net-metering regulations and interconnection requirements.
Onerous insurance or safety disconnect requirements can unnecessarily stifle willing homeowners before they even begin buying equipment. Some states however, like New Jersey, Colorado and Pennsylvania are working out these details in a way that protects public safety, assures utilities of safe interconnection and maintenance practices and supports small scale renewable distributed generation. The Network for New Energy Choices provides up to date analysis and reporting on statewide net-metering and interconnection rules. See their report Freeing the Grid: 2007 Edition.
“As of September 2007, thirty-nine states had adopted statewide programs that established rules for compensating consumers who own grid-tied renewable-energy systems. These programs award owners of small, grid-tied renewables the same savings as one would expect from conserving energy on-site.” – Freeing the Grid; Report No. 02-07 November 2007
Progressive Uilities
Utilities have a long history of making excuses for not supporting net-metering or distributed generation connections to the grid, yet for those utilities that have seen the light, customers are helping to meet the growing need for electricity in a way that actually saves utilities money in reduced infrastructure, improved reliability and deferred generation and transmission improvements . One of the leaders in small system residential solar development is the Sacramento Municipal Utility District (SMUD). “SMUD offers an incentive of $2.50 per watt, based on system performance (orientation, array, tilt and shade). The incentive will be paid to the approved PV contractor and should be reflected in the contractor's bid to the customer.”
What is the incentive for utilities to support distributed renewable energy generation? In the long run it will be survival, but in the short run its just money and reliability. In my last post I referred to the North American Reliability Corporation’s Long Term Reliability Assessment conclusions. They discuss electric power shortages in as little as two years. No matter which source you consult, everyone agrees that even with major conservation efforts, there will be a shortage of power. By promoting distributed generation, utilities add resources without the expense of generation and transmission.
Without the three pronged dedication of homeowners willing to dig into their own pockets, State regulator’s supporting reasonable enabling legislation and local utility support and cooperation, the green power revolution will choke on unfulfilled expectations. There are positive signs that all three key actors have learned from past mistake and are working toward a more supportive and measured approach to small scale distributed generation.
The recent Coop America Utility Solar Assessment (USA) Study summary says, “For the first time in history, a confluence of forces is coming together — solar technology developments, conventional energy price increases, aging transmission and distribution infrastructure, climate concerns, security issues, and others — that bring the dramatic worldwide growth of solar increasingly to center stage. In this rapidly changing energy landscape, the 10 percent goal is truly within reach.”
Next week I’ll go into more detail about utility company attitudes towards interconnection requirements and net-metering.
Hey. My hit counter says someone is reading this. What do you think ? Post a comment. If you have a question about energy conservation or renewable energy ask me, I'll try to find objective answers.
© Mark Daily, 2008
Wednesday, September 3, 2008
What will you do when your area runs out of electricity? - Preparing for Future Electricity Demands
Ignoring the title question is like an ostrich hiding its head in the sand when attacked by wild dogs. Guess which part of the anatomy gets bitten first? So it could be with us, if we all ignore the facts when it comes to getting electricity to our homes and businesses.
Electricity users throughout the United States and Canada are being ostriches unless they actively ask their elected Representatives to deal with the question, “how can we power the future without destroying the planet or making electricity a luxury few can afford”.
“Summer peak demand in the U.S. is forecast to increase over 135,000 MW or 17.7 percent in the next ten years with committed resources projected to increase 77,000 MW or 8.4 percent
(including uncommitted resources, 123,000 MW or 12.7 percent).” Source: NERC 2007 Long-Term Reliability Assessment
No matter which study or forecast you review, the answer comes out the same. We will not have enough electric power to meet our needs in as little as two years, if our current (pun intended) behavior doesn’t change. It the NERC assessment is correct we will have 5 percent less electricity than we need when 2018 arrives in less than ten years.
Don’t be an ostrich, take action. If you are a member of a rural electric cooperative your supplier belongs to the National Rural Electric Cooperative Association. They created a website that makes it easy for anyone to contact their elected representatives. I did it in about five minutes and you can do it too.
Go to https://www.ourenergy.coop and after reading that page, scroll down to the line that says "Contact your electric officials and begin the dialogue now". When you click the arrow at the end of this line, you will be asked to fill out your name and address to email your US Senators and US House of Representatives with the following message:
Our country faces a crisis as electricity use increases faster than available supply. I believe that by unleashing American ingenuity we can solve this problem. What are you doing to speed the development of new technology which will allow me to have the electric power I need while meeting our national climate policy goals? I look forward to your answer and will share it with my friends and neighbors. Thank you.
Then click “Send Message”, that’s it. You don’t even have to know who your representatives are. By filling in your name and address your message will automatically be sent to the correct representatives and you will get a brief confirming message listing which representatives were emailed on your behalf. It’s easy.
Let me know who it went and what you think about it.
© Mark Daily, 2008
Electricity users throughout the United States and Canada are being ostriches unless they actively ask their elected Representatives to deal with the question, “how can we power the future without destroying the planet or making electricity a luxury few can afford”.
“Summer peak demand in the U.S. is forecast to increase over 135,000 MW or 17.7 percent in the next ten years with committed resources projected to increase 77,000 MW or 8.4 percent
(including uncommitted resources, 123,000 MW or 12.7 percent).” Source: NERC 2007 Long-Term Reliability Assessment
No matter which study or forecast you review, the answer comes out the same. We will not have enough electric power to meet our needs in as little as two years, if our current (pun intended) behavior doesn’t change. It the NERC assessment is correct we will have 5 percent less electricity than we need when 2018 arrives in less than ten years.
Don’t be an ostrich, take action. If you are a member of a rural electric cooperative your supplier belongs to the National Rural Electric Cooperative Association. They created a website that makes it easy for anyone to contact their elected representatives. I did it in about five minutes and you can do it too.
Go to https://www.ourenergy.coop and after reading that page, scroll down to the line that says "Contact your electric officials and begin the dialogue now". When you click the arrow at the end of this line, you will be asked to fill out your name and address to email your US Senators and US House of Representatives with the following message:
Our country faces a crisis as electricity use increases faster than available supply. I believe that by unleashing American ingenuity we can solve this problem. What are you doing to speed the development of new technology which will allow me to have the electric power I need while meeting our national climate policy goals? I look forward to your answer and will share it with my friends and neighbors. Thank you.
Then click “Send Message”, that’s it. You don’t even have to know who your representatives are. By filling in your name and address your message will automatically be sent to the correct representatives and you will get a brief confirming message listing which representatives were emailed on your behalf. It’s easy.
Let me know who it went and what you think about it.
© Mark Daily, 2008
Monday, August 25, 2008
Save the Planet Save Your money- This book helps you do both
Looking for a great tax free investment? Wishing for an operating manual for your house? Longing to know how to evaluate your energy using appliances and home heating systems? Puzzled why your electric bill was so high? Frustrated trying to learn what to do about it? Now there are solutions to your problems with a new book by Godo Stoyke.
Energy efficiency guru Amory Lovins has said it for decades. When it comes to electricity generation, saving energy equals constructing energy supply. Now we have a tool to help us reduce the need for more power plants and save cash at home, all at the same time. And, the best part is that if you pick the right energy conservation efforts, you’ll have a better return on investment then anything you can do in the stock market even when the stock market was doing well.
The Carbon Buster’s Home Energy Handbook by Godo Stoyke (New Society Publishers) is the next best thing to an owner’s manual for your home. Chapter by chapter, step by step, this easy to read book lays out choices that you can make in your home to live better, reduce your impact on the globe and keep more money in your pocket and out of the utility company’s cash register.
The best part about saving energy with this book is that it’s short. In only 131 pages, LEED accredited graduate of the University of Alberta Master of Science program, lays out a clear picture of concrete steps you can take to identify your home’s energy appetite, search for unwanted energy hogs and quickly learn what can and can’t save you money.
“The purpose of this book is to show you the most effective and most cost effective ways to reduce your carbon emissions and the best ways to reduce your family’s energy bills.” Stoyke goes on to describe products and technologies that do just that. He explains the way of the Carbon Miser, whose only mission is to get the best return on investment (ROI) versus the Carbon Buster whose emphasis is reducing negative environmental consequences.
In nicely designed appendices Stoyke provides tables that list Efficiency measures with their corresponding carbon reductions, cost savings and payback years. He even lists energy conservation steps according to best return on investment.
This should be one book that everyone has in the house.
© Mark Daily, 2008
Energy efficiency guru Amory Lovins has said it for decades. When it comes to electricity generation, saving energy equals constructing energy supply. Now we have a tool to help us reduce the need for more power plants and save cash at home, all at the same time. And, the best part is that if you pick the right energy conservation efforts, you’ll have a better return on investment then anything you can do in the stock market even when the stock market was doing well.
The Carbon Buster’s Home Energy Handbook by Godo Stoyke (New Society Publishers) is the next best thing to an owner’s manual for your home. Chapter by chapter, step by step, this easy to read book lays out choices that you can make in your home to live better, reduce your impact on the globe and keep more money in your pocket and out of the utility company’s cash register.
The best part about saving energy with this book is that it’s short. In only 131 pages, LEED accredited graduate of the University of Alberta Master of Science program, lays out a clear picture of concrete steps you can take to identify your home’s energy appetite, search for unwanted energy hogs and quickly learn what can and can’t save you money.
“The purpose of this book is to show you the most effective and most cost effective ways to reduce your carbon emissions and the best ways to reduce your family’s energy bills.” Stoyke goes on to describe products and technologies that do just that. He explains the way of the Carbon Miser, whose only mission is to get the best return on investment (ROI) versus the Carbon Buster whose emphasis is reducing negative environmental consequences.
In nicely designed appendices Stoyke provides tables that list Efficiency measures with their corresponding carbon reductions, cost savings and payback years. He even lists energy conservation steps according to best return on investment.
This should be one book that everyone has in the house.
© Mark Daily, 2008
Monday, August 18, 2008
SHOP FOR ENERGY EFFICIENT APPLIANCES
Shopping for appliances isn’t fun. I usually don’t shop for an appliance until the one I have breaks down. Then, it’s a mad dash to the store to find a quick replacement. When a season’s worth of frozen vegetables is melting in your busted freezer, energy conservation is the last thing on your mind.
Unfortunately a hasty decision in the appliance selection process can cost you extra cash over the next fifteen years, the average life of most home appliances. “When you buy an appliance, you commit to paying both the first cost and the operating cost for as long as you own it. And over the life of an appliance, the energy cost to run it can be many times greater than the first cost. So it pays to buy an energy-efficient appliance,” says the introduction to the American Council for an Energy Efficient Economy’s Consumer Guide.
A refrigerator or freezer that costs an extra $200 but saves you $100 per year in energy bills, will not be $200 more expensive than the cheaper model. Actually in fifteen years it will have been $1,300 less expensive due to the higher operating costs of the cheaper model. So, if you really want to save money on appliances don’t compare price, compare efficiency ratings instead.
When shopping for appliances there are two stickers that help you compare. One is the Yellow Energy Guide. The other is the Energy Star Label.
The Yellow Energy Guide label shows a comparison of the highest and lowest energy consumption or efficiency estimates of similar appliance models, based on test procedures established by the US Department of Energy. This information lets you compare the features, size and energy usage of different models. From “uses least energy” to “uses most energy,” a scale shows how a model stacks up against the competition. Since 1980, the Federal Trade Commission has required the Energy Guide labels on refrigerators, freezers, dishwashers, clothes washers, room air conditioners, water heaters, furnaces, boilers, central air conditioners, heat pumps and pool heaters. Labels are not yet required on clothes dryers, portable space heaters, kitchen ranges, microwave ovens, lights or on-demand tank-less water heaters.
Energy Star labels are not on all appliances, but you should always look for this sticker to get the most efficient appliance possible. To earn the ENERGY STAR, these appliances must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy. They use less energy and reduce your contribution to green house gas emissions from power plants.
More than 70% of American households recognize the Energy Star label. DOE estimates that $16 billion dollars was saved by consumers on 2007 utility bills.
According to the DOE Energy Star website here is what you can expect in savings by purchasing the following Energy Star appliances.
-Qualified refrigerators are at least 15% more efficient than the minimum federal efficiency standard.
-Qualified TVs consume 3 watts or less when switched off, compared to a standard TV, which consumes almost 6 watts on average.
-Office equipment that qualifies automatically enters a low-power "sleep" mode after a period of inactivity.
-Qualified light bulbs (compact florescent or CFL) use two-thirds less energy than a standard incandescent bulb and must meet additional operating and reliability guidelines.
-Qualified furnaces offer a rating of 90% AFUE (Annual Fuel Utilization Efficiency) or greater, which is about 15% more efficient than the minimum federal efficiency standard.
So buying Energy Star appliances ensures that you are buying the most efficient models possible. You also save money by getting appliances with the “least energy used” per model category. Shop now, but don’t buy until you really need a new appliance. After all, these standards may change again and manufacturers are always coming up with more energy efficient models. That shouldn’t keep you being prepared by shopping ahead of time.
© Mark Daily, 2008
Unfortunately a hasty decision in the appliance selection process can cost you extra cash over the next fifteen years, the average life of most home appliances. “When you buy an appliance, you commit to paying both the first cost and the operating cost for as long as you own it. And over the life of an appliance, the energy cost to run it can be many times greater than the first cost. So it pays to buy an energy-efficient appliance,” says the introduction to the American Council for an Energy Efficient Economy’s Consumer Guide.
A refrigerator or freezer that costs an extra $200 but saves you $100 per year in energy bills, will not be $200 more expensive than the cheaper model. Actually in fifteen years it will have been $1,300 less expensive due to the higher operating costs of the cheaper model. So, if you really want to save money on appliances don’t compare price, compare efficiency ratings instead.
When shopping for appliances there are two stickers that help you compare. One is the Yellow Energy Guide. The other is the Energy Star Label.
The Yellow Energy Guide label shows a comparison of the highest and lowest energy consumption or efficiency estimates of similar appliance models, based on test procedures established by the US Department of Energy. This information lets you compare the features, size and energy usage of different models. From “uses least energy” to “uses most energy,” a scale shows how a model stacks up against the competition. Since 1980, the Federal Trade Commission has required the Energy Guide labels on refrigerators, freezers, dishwashers, clothes washers, room air conditioners, water heaters, furnaces, boilers, central air conditioners, heat pumps and pool heaters. Labels are not yet required on clothes dryers, portable space heaters, kitchen ranges, microwave ovens, lights or on-demand tank-less water heaters.
Energy Star labels are not on all appliances, but you should always look for this sticker to get the most efficient appliance possible. To earn the ENERGY STAR, these appliances must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy. They use less energy and reduce your contribution to green house gas emissions from power plants.
More than 70% of American households recognize the Energy Star label. DOE estimates that $16 billion dollars was saved by consumers on 2007 utility bills.
According to the DOE Energy Star website here is what you can expect in savings by purchasing the following Energy Star appliances.
-Qualified refrigerators are at least 15% more efficient than the minimum federal efficiency standard.
-Qualified TVs consume 3 watts or less when switched off, compared to a standard TV, which consumes almost 6 watts on average.
-Office equipment that qualifies automatically enters a low-power "sleep" mode after a period of inactivity.
-Qualified light bulbs (compact florescent or CFL) use two-thirds less energy than a standard incandescent bulb and must meet additional operating and reliability guidelines.
-Qualified furnaces offer a rating of 90% AFUE (Annual Fuel Utilization Efficiency) or greater, which is about 15% more efficient than the minimum federal efficiency standard.
So buying Energy Star appliances ensures that you are buying the most efficient models possible. You also save money by getting appliances with the “least energy used” per model category. Shop now, but don’t buy until you really need a new appliance. After all, these standards may change again and manufacturers are always coming up with more energy efficient models. That shouldn’t keep you being prepared by shopping ahead of time.
© Mark Daily, 2008
Monday, August 11, 2008
Clear Skies is a Lie
I can’t figure out why the public isn’t outraged over the obvious disregard for human health that comes with provisions of President Bushes’ Clear Skies Act. This is just one in a long list of legislation proposed by the Bush administration that does the exact opposite of its title. The Clear Skies Act makes our skies less clear by so many measurable standards that the title could only have been selected by a room full of comedians. Clear Skies? I don’t think so.
According the National Resource Defense Counsel, “The Clear Skies legislation sets new targets for emissions of sulfur dioxide, mercury, and nitrogen oxides from U.S. power plants. But these targets are weaker than those that would be put in place if the Bush administration simply implemented and enforced the existing law! Compared to current law, the Clear Skies plan would allow three times more toxic mercury emissions, 50 percent more sulfur emissions, and hundreds of thousands more tons of smog-forming nitrogen oxides. It would also delay cleaning up this pollution by up to a decade compared to current law and force residents of heavily-polluted areas to wait years longer for clean air compared to the existing Clean Air Act.”
Zachary Roth writing for the Columbia Journalism Review put it this way, “It’s not just that the Clear Skies reduction targets are “little different” from what would be achieved by simply enforcing the Clean Air Act. It’s that Clear Skies, despite its name, would actually lead to more pollution than the existing Clean Air Act, because current law calls for further reductions over time.
In other words, either Clear Skies or strict enforcement of the Clean Air Act would make the air cleaner than it is today. But enforcing current law will achieve greater reductions than would Clear Skies”.
According to Energy Central Ken Silverstien “In February, a federal appeals court in Washington, D.C. ruled that the U.S. Environmental Protection Agency had violated the Clean Air Act by refusing to make mercury reductions mandatory. Instead, the Bush administration had proposed a voluntary cap-and-trade system that it says would have reduced mercury emissions by 70 percent by 2018.”
Yet cap and trade means that those that can trade, create hot zones of mercury pollution that may exceed responsible mercury pollution standards.
The NRDC says that “Mercury can cause serious neurological and developmental damage, including birth defects, subtle losses of sensory or cognitive ability, and delays in developmental milestones such as walking and talking. Power plants are responsible for 34 percent of all mercury emissions, which settle into our waters, where they accumulate in fish. In 41 states, officials warn against eating fish from mercury-contaminated lakes and rivers.”
Are people really so busy that they can’t rally enough vocal opposition to this blatant attempt to court irresponsible industries? Are we so strapped financially that we can’t keep our air clean enough to avoid health problems?
If this is all about money why aren’t the taxpayers outraged at the expense of treating air pollution related illnesses and diseases. It has to be less expensive to prevent the pollution than it is to treat all of the health problems associated with dirty air. Yet, people remain focused on complaints about the high cost of electricity without realizing that they are going to have to pay more money for health problems than they would for prevention programs.
I just don’t get it. Can someone out there explain it to me?
According the National Resource Defense Counsel, “The Clear Skies legislation sets new targets for emissions of sulfur dioxide, mercury, and nitrogen oxides from U.S. power plants. But these targets are weaker than those that would be put in place if the Bush administration simply implemented and enforced the existing law! Compared to current law, the Clear Skies plan would allow three times more toxic mercury emissions, 50 percent more sulfur emissions, and hundreds of thousands more tons of smog-forming nitrogen oxides. It would also delay cleaning up this pollution by up to a decade compared to current law and force residents of heavily-polluted areas to wait years longer for clean air compared to the existing Clean Air Act.”
Zachary Roth writing for the Columbia Journalism Review put it this way, “It’s not just that the Clear Skies reduction targets are “little different” from what would be achieved by simply enforcing the Clean Air Act. It’s that Clear Skies, despite its name, would actually lead to more pollution than the existing Clean Air Act, because current law calls for further reductions over time.
In other words, either Clear Skies or strict enforcement of the Clean Air Act would make the air cleaner than it is today. But enforcing current law will achieve greater reductions than would Clear Skies”.
According to Energy Central Ken Silverstien “In February, a federal appeals court in Washington, D.C. ruled that the U.S. Environmental Protection Agency had violated the Clean Air Act by refusing to make mercury reductions mandatory. Instead, the Bush administration had proposed a voluntary cap-and-trade system that it says would have reduced mercury emissions by 70 percent by 2018.”
Yet cap and trade means that those that can trade, create hot zones of mercury pollution that may exceed responsible mercury pollution standards.
The NRDC says that “Mercury can cause serious neurological and developmental damage, including birth defects, subtle losses of sensory or cognitive ability, and delays in developmental milestones such as walking and talking. Power plants are responsible for 34 percent of all mercury emissions, which settle into our waters, where they accumulate in fish. In 41 states, officials warn against eating fish from mercury-contaminated lakes and rivers.”
Are people really so busy that they can’t rally enough vocal opposition to this blatant attempt to court irresponsible industries? Are we so strapped financially that we can’t keep our air clean enough to avoid health problems?
If this is all about money why aren’t the taxpayers outraged at the expense of treating air pollution related illnesses and diseases. It has to be less expensive to prevent the pollution than it is to treat all of the health problems associated with dirty air. Yet, people remain focused on complaints about the high cost of electricity without realizing that they are going to have to pay more money for health problems than they would for prevention programs.
I just don’t get it. Can someone out there explain it to me?
Wednesday, August 6, 2008
Electric Rates- Consumers Must Wade Through the Hype and Speak Up
Writing about energy issues isn’t easy. There are a host of dueling experts that love to aggressively champion their ideas. Some even have secret motives tied to parts of the energy industry. Are these objective writers? It’s hard to say frankly. I once had a person reading my material wonder aloud “which side are you on”? That really is the whole point of my writing. I don’t want to be on a “side” unless it is the side of getting the most accurate and honest information out to the most number of people.
As general consumers I believe we still have a rather naive view of electric energy and electric energy issues. Many people still hold the idea that there are these robber baron capitalists that are cranking out copious amount of “dirty” electricity trying to make the most money for the least investment possible. Of course, this is the American way some would argue.”What’s wrong with that? ”, some might say; Nothing, actually. That may well be the goal of most utility companies and their investors. Yet each state has its own utility commission that reviews utility rate increases and keeps a lid on potential abuses from the private sector. Municipal Utilities have tax payers that theoretically are keeping an eye on things and can vote the scoundrels out if rates climb beyond reasonable expense recovery and, member owned public power districts and member owned rural electric cooperatives also have the “membership vote” regulation in play.
So, if these regulating functions are doing their jobs no one should be paying more than absolutely necessary for electricity and no utility company should be getting windfall profits from the sale of electricity. And, I think that this has largely been the case with the California mess and Enron being the main exceptions to the rule. Fingers pointing in so many directions on those debacles that everyone got a little of the blame there.
In fact with those exceptions, regulators have been doing their jobs so well that in many states prices per kilowatt hour had actually gone down in the 90’s as a result of deals made between regulators and utilities over electric utility de-regulation. Unfortunately increasing fuel costs for all utilities have cancelled out the anticipated price reductions and left many companies in the red begging for rate increases in recent years. Our memories are short when it comes to electricity prices, so the feelings consumers have today are strictly based on recent and nation-wide rate increases and any residual positive perception from the rate decreases of the 90’s has long evaporated in the angry and heated response over the most recent bill.
So, what’s a consumer to do? The main thing a consumer can do is get familiar with their electric bill. How much are you paying per kilowatt hour? What is your monthly kWh use? How much does your monthly use fluctuate with the seasons? What appliances do you have that contribute the most to your electric bill? These questions all go to the heart of the concept – “if it’s not being measured, it’s not being managed”, and if you aren’t trying to manage your electric bill, then you deserve whatever bill you get. And, whatever bill you get is your fault, not your utility’s.
The next best thing you can do is let your elected representative know that you are tired of them spending so much time worrying about what’s going on in public bathrooms and private bedrooms and get back to the job we elected them to do, which is to research, propose and adopt legislation that encourages us all to take a long range view of energy issues.
As general consumers I believe we still have a rather naive view of electric energy and electric energy issues. Many people still hold the idea that there are these robber baron capitalists that are cranking out copious amount of “dirty” electricity trying to make the most money for the least investment possible. Of course, this is the American way some would argue.”What’s wrong with that? ”, some might say; Nothing, actually. That may well be the goal of most utility companies and their investors. Yet each state has its own utility commission that reviews utility rate increases and keeps a lid on potential abuses from the private sector. Municipal Utilities have tax payers that theoretically are keeping an eye on things and can vote the scoundrels out if rates climb beyond reasonable expense recovery and, member owned public power districts and member owned rural electric cooperatives also have the “membership vote” regulation in play.
So, if these regulating functions are doing their jobs no one should be paying more than absolutely necessary for electricity and no utility company should be getting windfall profits from the sale of electricity. And, I think that this has largely been the case with the California mess and Enron being the main exceptions to the rule. Fingers pointing in so many directions on those debacles that everyone got a little of the blame there.
In fact with those exceptions, regulators have been doing their jobs so well that in many states prices per kilowatt hour had actually gone down in the 90’s as a result of deals made between regulators and utilities over electric utility de-regulation. Unfortunately increasing fuel costs for all utilities have cancelled out the anticipated price reductions and left many companies in the red begging for rate increases in recent years. Our memories are short when it comes to electricity prices, so the feelings consumers have today are strictly based on recent and nation-wide rate increases and any residual positive perception from the rate decreases of the 90’s has long evaporated in the angry and heated response over the most recent bill.
So, what’s a consumer to do? The main thing a consumer can do is get familiar with their electric bill. How much are you paying per kilowatt hour? What is your monthly kWh use? How much does your monthly use fluctuate with the seasons? What appliances do you have that contribute the most to your electric bill? These questions all go to the heart of the concept – “if it’s not being measured, it’s not being managed”, and if you aren’t trying to manage your electric bill, then you deserve whatever bill you get. And, whatever bill you get is your fault, not your utility’s.
The next best thing you can do is let your elected representative know that you are tired of them spending so much time worrying about what’s going on in public bathrooms and private bedrooms and get back to the job we elected them to do, which is to research, propose and adopt legislation that encourages us all to take a long range view of energy issues.
Subscribe to:
Posts (Atom)
